Alling-Lander |
| Alling-Lander CT68084 Alling-Lander Dual Shaft Speed Reducer Ratio:50 This Alling-Lander Division / Regal-Beloit Corp. model 2312-U-1-S/S-103 Blue Max Worm Gear Speed Reducer (Ratio: 50, Input HP: 1.50, Rating @ 1800rpm) looks to be in good cosmetic condition, and appears to be new and unused. It was still factory... MFG Part No: 2312-U-1-S/S-103SKU: C68084OutbackEquipment ID: 32820 | $49.99Shipping from $52.31 |
| Alling-Lander CT69128 Alling-Lander Dual Shaft Speed Reducer Ratio:50 This Alling-Lander Division / Regal-Beloit Corp. model 2312-U-1-S/S-103 Blue Max Worm Gear Speed Reducer (Ratio: 50, Input HP: 1.50, Rating @ 1800rpm) looks to be in good cosmetic condition, and appears to be new and unused. It was still factory... MFG Part No: 2312-U-1-S/S-103SKU: CT69128OutbackEquipment ID: 34487 | $49.99Shipping from $52.31 |
Asymtek |
| Asymtek Millennium Series Dispensing System, 600 You are bidding on an Asymtek Millennium Series Dispensing System. I did not find a model number on the system so I’m guessing it’s from the 600 series. The placard in the back reads model M-FCPGA-INT, but in my research I did not find a system under... MFG Part No: 600SKU: A51532OutbackEquipment ID: 28558 | $19,999.00 $50,000.00Shipping from $250.00 |
BalTec |
| BalTec C70969 BalTec 4 kN LP Pneumatic Press w / Dig Force Gauge This BalTec 4 kN LP Pneumatic Press with Burster Prozesswert-Anzeiger Digital Force Gauge (0-20.00kN) looks to be in good cosmetic condition, showing some minor signs of wear. I hooked it up to my air compressor, and the press head lowers when the... MFG Part No: C70969SKU: C70969OutbackEquipment ID: 35225 | $999.99Shipping from $0.00 |
Banner |
| Banner C70573 Banner Mini-Screen MSDINT-1 Controller & Manual This lot includes a Banner Mini-Screen MSDINT-1 Controller, along with an instruction manual and four Specified Test Pieces (STP-2 0.75", STP-3 1.75", STP-7 1" and STP-8 2"), as shown. These items look to be in good cosmetic condition, and appear to... MFG Part No: MSDINT-1SKU: C70573OutbackEquipment ID: 35204 | $24.99Shipping from $21.80 |
Bay Vortex |
| Bay Vortex N54993 Bay Vortex Heat Exchanger HRE-HT-0650 This auction is for one Bay Vortex Heat Exchanger. (Model: HRE-HT-0650) It is in good cosmetic condition, besides some minor scratches and scuffs. It appears to have little previous use though, if any. It comes with all of the cables seen on the back... MFG Part No: HRE-HT-0650SKU: N54993OutbackEquipment ID: 32986 | $299.99Shipping from $0.00 |
Boston |
| Boston C70228 Boston Gear 700 Series 400:1 Reducer 5700 lb-in This Boston Gear 700 Series 400:1 Gear Speed Reducer (cat.no. HA734800G; Input H.P. 0.66, Output Torque: 5700 lb-in.) looks to be in good cosmetic condition, showing some minor signs of wear. The shafts rotate smoothly. Sold as-is. MFG Part No: 700?SKU: C70228OutbackEquipment ID: 35179 | $99.99Shipping from $235.02 |
Cray |
| Cray A60517 Cray Research HEU-MPP Heat Exchanger Unit You are bidding on a Cray Research HEU-MPP Heat Exchanger Unit 12300200-7 as shown in the pictures. It looks to be in good cosmetic condition with some minor signs of wear and previous use (one of the side panels is bent a little). I really lack the... MFG Part No: HEU-MPPSKU: A60517OutbackEquipment ID: 32702 | $499.99Shipping from $0.00 |
Crest Ultrasonic |
| Crest Ultrasonic Y70234 Crest Ultrasonic Cleaner & Ultrasonic Generator Up for sale is a used Crest Ultrasonic Cleaner with Ultrasonic Generator. The item appears to be in excellent condition, possibly unused. The item is being sold used because it is impossibly to verify its condition. The model number is stamped as... MFG Part No: Y70234SKU: Y70234OutbackEquipment ID: 35275 | $1,999.99Shipping from $0.00 |
Eastley |
| Eastley G40949 Eastey Ent. Shrink Packaging Tunnel ET 1610-48 This auction is for a Jeff Eastey Enterprises Shrink Packaging Tunnel model ET 1610-48. This item appears to be in good cosmetic condition, showing signs of previous use. I powered up the unit and the blower came on, the conveyer moved and is... MFG Part No: ET 1610-48SKU: G40949OutbackEquipment ID: 32823 | $799.99Shipping from $0.00 |
Edwards |
| Edwards C69191 Edwards High Vacuum GRC Gas Reactor Column This Edwards High Vacuum GRC Gas Reactor Column looks to be in good cosmetic condition, showing some minor signs of wear. However, I have no way of testing it, and it is being sold as-is. MFG Part No: C69191SKU: C69191OutbackEquipment ID: 34522 | $499.99Shipping from $125.71 |
Generic |
| Generic Y66268 Lot 3 Stainless Steel Fluid Liquid Holding Tanks Up for sale is a lot of 3 Stainless Steel Holding Tanks. There are mounting point on the sides of the tank, as well as a fluid level meter. The measurements of the outlet are roughly 2" outer diameter and roughly 1.5" inner diameter. All of the tanks... MFG Part No: Y66268SKU: Y66268OutbackEquipment ID: 35194 | $24.99Shipping from $21.80 |
| Generic Y70908 Lot2 Syntron Paper Jogger J-1-B Up for sale is a lot of 2 used Syntron Paper Joggers, model J-1-B. Both units power up and vibrate according to the adjument knob. One unit is missing a top plate and the other unit's top plate appears to be cracked. The units are UNTESTED and being... MFG Part No: J-1-BSKU: Y70908OutbackEquipment ID: 35195 | $80.00Shipping from $59.35 |
Hahn & Kolb |
| Hahn & Kolb C56440 (4) Hahn & Kolb Torque Gauges 0-2.5 / 10 / 100 / 400kN This auction is for a lot of four Hahn & Kolb Torque Gauges, as shown. They look to be in good cosmetic condition, showing some minor signs of wear. However, I have no way of testing them, and they are being sold as-is. They range from 0 to 2.5kN ... MFG Part No: C56440SKU: C56440OutbackEquipment ID: 32752 | $99.99Shipping from $59.35 |
HTG |
| HTG 84-3 (350W) UV Lamp Mask Aligner w / Power Sup HTG (the Hybrid Technology Group) System 1 model 84-3 (350W) UV Lightsource Arc Lamp Housing (mfd. 2/17/84) along with an HTG P.M. 150-250-400W Power Supply, as shown. These items look to be in decent cosmetic condition, showing somes signs of wear.... MFG Part No: 84-3SKU: C64574OutbackEquipment ID: 29774 | $7,999.99Shipping from $0.00 |
Lindberg |
| Lindberg A68882 Lindberg / Blue M STF55666C Solid Tube Furnace This Lindberg/Blue M STF55666C Solid Tube Furnace 1100�C looks to be in good cosmetic condition with signs of wear and previous use (some pieces of furnace broken off inside). I really lack the knowledge and equipment to test properly so it is being... MFG Part No: STF55666CSKU: A68882OutbackEquipment ID: 34503 | $1,499.99Shipping from $0.00 |
Logitech |
| Logitech K69474 Logitech LP50 Precision Lapping & Polish. System This Logitech LP50 Precision Lapping & Polishing System appears to be in good cosmetic condition with some signs of previous use. (Please see the photos that are located above for more details.) I was able to power this unit on and the display screen... MFG Part No: LP50SKU: K69474OutbackEquipment ID: 34509 | $32,499.99Shipping from $0.00 |
| Logitech N69528 Logitech PM5 Lapping Polishing System IPM5 Up for sale is a Logitech PM5 Lapping & Polishing System. It is in good cosmetic condition, with some minor scratches, scuffs and signs of use. Please see photos for more detail. I plugged this unit in, and it powered on and all 4 of the displays lit... MFG Part No: PM5?SKU: N69528OutbackEquipment ID: 35140 | $19,999.99Shipping from $269.24 |
Metcal |
| Metcal C70837 Metcal Tweezer Soldering Tool Holder Stand This Metcal Tweezer Soldering Tool Holder looks to be in good cosmetic condition, showing some signs of wear. Sold as-is. MFG Part No: C70837SKU: C70837OutbackEquipment ID: 35205 | $24.99Shipping from $19.60 |
MKS |
| MKS C70013 Lot 40 MKS HPS ISO NW160-250 Single Claw Clamps This lot includes forty new-in-bag MKS/HPS 100761016 ISO NW160-250 Single Claw Aluminum Vacuum Flange Clamps, as shown. Sold as-is. MFG Part No: C70013SKU: C70013OutbackEquipment ID: 35306 | $39.99Shipping from $24.20 |
