You have no items in your shopping cart.

You have no items to compare.

Search
Name
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. A106172 Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll

    $20,000.00
    This Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll looks to be in good cosmetic condition with signs of wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. The weight and dims are approximates. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder Learn More
  2. A107450 Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven

    $20,000.00
    This Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven looks to be in good cosmetic condition with signs of wear and wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. Removal/ shipping of this item would require rigging and custom made pallets or crates. The cost will be paid for by the winning bidder. Please see pictures for more details. Learn More
  3. A111260 Karl Suss MJB3 Mask Aligner, Type 401001

    $12,000.00
    This Karl Suss MJB3 Mask Aligner, Type 401001 looks to be in decent cosmetic condition with signs of wear and previous use (scratches, paint chips as shown). I could hear it power on, however I really lack the knowledge and equipment to test properly so it is being sold as-is. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18. Unpacked dims 30*24*18. See pictures for more details. Learn More
  4. A113164 Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons

    $4,500.00
    This Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons looks to be in good cosmetic condition with signs of wear and previous use. It powered up as shown and was fully operational prior to removal. I really lack the knowledge and equipment and to test properly so it is being sold as-is. Due to the size of this unit, a custom made pallet(s) will be required to ship it. The cost of the pallet(s) will be paid for by the winning bidder. The cost of the rigging & freight will be paid for by the winning bidder.Ful Learn More

    Buy on eBay

  5. A82472 Dynatex DX-III Wafer Scriber Breaker

    $9,999.99
    This Dynatex DX-III Wafer Scriber Breaker looks to be in good cosmetic condition with some signs of wear and previous use (top panel has some scratches). When plugged in I could see light coming from a few places as shown. It also comes with a Sony CCD-IRIS Camera (one of the cables on top is cut). I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 32*30*24. See pictures for more details. Learn More
  6. A94770 ASM Assembly Automation AD809S Die Bonder

    $9,999.99
    This ASM Assembly Automation AD809S Die Bonder looks to be in good cosmetic condition with signs of wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. See pictures for more details. If more pictures are needed please feel free to e-mail. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. Learn More
  7. A98466 Thermotron Thermal Shock Environmental Dual Test Chamber

    $9,999.99
    This Thermotron Thermal Shock Environmental Test Chamber looks to be in good cosmetic condition with signs of wear and previous use. It's missing a front panel as shown and perhaps some other control modules that may have been on that panel. We did not find a namplate with the model and specifications, however I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 102*38*81H. See pictures for more details. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. This item will ship from our Mesquite, TX location. Learn More
  8. C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober

    $5,000.00
    This Pacific Western Systems (PWS) model P8AMS Probe II Station Semi-Automatic Wafer Prober looks to be in good cosmetic condition, showing some signs of wear. It features a Trio-Tech International Artic TC Temperature Controlled Chuck (8" Gold), a PWS Probe II Power Supply/Controller, and an EL-1302 Wafer Prober Drivers Unit with handheld controller. The chuck is mounted within a chamber, and the lid can be raised and lowered. The system powers up, and the stage moves around, and the system responds to input from the controls. When I pressed the start button, the stage started moving around automatically. I was also able to move it around manually using the manual control buttons and switches. The 2-Axis Positioning arch which moves over the probing chamber is controlled by the EL-1302 Drivers unit, and the handheld controller. It moves forward and back, and side to side. This is the extent of my testing of this probing system, and it is being sold as-is. Please see the photos above, and additional photos links below, for detail. Approximate overall unpacked dimensions: 38"L x 47"W x 58"H.

    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober11.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober12.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober13.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober14.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober15.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober16.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober17.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober18.jpg Learn More
  9. C105027 West-Bond 7400A Ultrasonic Manual Wedge Ribbon Bonder (refurbished)

    $7,500.00
    This West-bond 7400A Manual Ultrasonic/Thermosonic Wedge-Wedge Ribbon Bonder (s/n 9078; 115V, 1A, 50/60Hz) with tool heat looks to be in good cosmetic condition, showing some signs of wear. It is being sold refurbished and in working condition, with a 30-day parts warranty (lower US 48 states only). It comes with everything shown, including an Ultrasonic Generator, a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperature Controller, as shown (the microscope, generator and workholder/controller shown in the photos above are not necessarily the exact ones you will receive; they are shown merely to represent what a complete system will look like). Please allow 2 to 4 weeks for our technician to go thru the machine and make sure it is performing up to factory specs. A $1k deposit is required to begin refurbishment. Approximate overall unpacked dimensions: 24"L x 21"W x 16"H. We recommend having this system shipped in a crate, the cost of which will be the responsibility of the buyer.

    "The Westbond model 7400A is an ultrasonic/thermosonic wedge-wedge wire bonder designed to interconnect wire leads to semi-conductor, hybrid or microwave devices. The machine bonds aluminum or gold wires ranging from 0.0007 in. to 0.002 in. Bonds are made by the wedge-wedge technique using ultrasonic energy to attach aluminum wire at room temperature and adding work piece heat for gold wire. Wire is clamped and threaded diagonally under the bonding wedge, allowing independent feeding action but requiring front-to-back bonding direction. The bonding tool is lifted and lowered manually by the operator using hand/eye reference to the work elevations and to loop height." Learn More
  10. C106640 Orthodyne 20 Ultrasonic Heavy Wire Bonder w/ Dereeler (refurbished)

    $9,500.00
    This Orthodyne 20 Ultrasonic Heavy Wire Bonder with Wire Dereeler looks to be in good cosmetic condition, showing some signs of wear. It comes with a Stereo Zoom Microscope, although the one shown in the photos may not be the exact one you recieve. We are selling this bonder in working condition. We have a technician who refurbishes these for us, but it could take three months to getting it fully functional (parts take 12 weeks from Orthodyne). We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 26"L x 24"W x 24"H. Learn More
  11. C106869 ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer

    $5,000.00
    This ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the operator interface display is bright and clear. It runs some power-up self-tests, and no errors are reported, but after the system initializes, some alarms start going off, presumably because I do not have it hooked up properly (I hooked it up to power only). I lack the knowledge and equipment to formally test this system, and it is being sold as-is. It comes with an operation manual. Approximate overall unpacked dimensions: 42"L x 42"W x 87"H. Learn More
  12. C108387 Chemitronics HD-RD013 Automated UV Irradiation System

    $5,000.00
    This Chemitronics HD-RD013 UV Irradiation System looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the touch panel display is bright and clear, and it responds to input from the buttons. I was able to get all three tracks to start running their process, and all three completed their runs successfully. The system feature six IAI Robo Cylinder Intelligent Actuators, three mounted vertically, and three mounted horizontally. The horizontal ones apparently each hold a wafer-boat full of wafers, and advance step by step, while the three vertical ones extend an arm upwards, grab a wafer, and insert it into the UV chamber above, and then bring it back down after a few moments. Then the process is repeated until all of the wafers have been exposed in the UV chamber. However, this is the extent of my testing of this system, and it is being sold as-is. A Robo Cylinder E-Com RCA-T-ENG Teach Pendant is included to program the three IAI Drivers. Approximate overall unpacked dimensions: 48"L x 40"W x 54"H. Learn More
  13. C110988 West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder

    $7,500.00
    This West-Bond 4500 Microprocessor Controlled Programmable Ultrasonic Wedge-Wedge Wire Bonder looks to be in good cosmetic condition, showing some minor signs of wear. We have already had it refurbished, so it is fully operational, and ready for shipment. It will include a B&L StereoZoom 4 Microscope and a West-Bond model 1600 Ultrasonic Generator. The pictures that I took of this system before we had it refurbished show it with a model 1400 Ultrasonic Generator, which is not actually compatible with a 4500. The pictures of the system shrink wrapped were take after we had the machine refurbished, and it is wrapped up with a model 1600 Ultrasonic Geneator. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. Approximate overall unpacked dimensions: 24"L x 23"W x 15"H. We usually recommend having bonders crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
  14. C113200 Automation GT Automated Palletizing TCAG Pallet System w/Stages, Feeders

    $4,000.00
    This Automation GT Automated Palletizing TCAG Pallet System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but the display reports that the "E Stop Activated" and needs to be released. I tried, but was unable to get this message to go away, and I was unable to get the machine to do anything else. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1500 PLC with two DC Input Modules, and two DC Output Modules, a Maple Systems Operator Interface Touchpanel Display, two ATEC-CYL Vibratory Feeders (M0363 and M0364) each with a C210-80 Vibration Generator / Cotroller, a Keyence VG-036T & VG-036R Sensor Assembly with VG-301 Controller, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  15. C113201 Automation GT Automated Braze Stacking 3-Axis Positioning System

    $3,000.00
    This Automation GT Automated Braze Stacking System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but when I pressed the start button, the stage seemed to try to move in both directions, but could not, and then errors came on the display: "X-Y Alarm" and "X-Y Servo Not On." The stages move smoothly when moved by hand, but I tried auto starting the system a couple more time, and kept getting the same errors. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1200 PLC with Maple Systems Operator Interface Touchpanel Display, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  16. C113239 Veeco Dektak SXM Atomic Force Microscope, Equipe Robots, 8" Wafer Chuck

    $50,000.00
    This Veeco Dektak SXM Atomic Force Microscope includes the controller cabinet with computer, as shown. looks to be in good cosmetic condition, showing some signs of wear. It powers up, as shown in the photos above, and I was able to access the computer and software, but I'm really now sure how to test it. Among other things, it features an Equipe ATM Wafer Handling Robot and Prealigner, and it includes a couple manuals, and five CD Tips (one is marked bad), as shown. I lack the knowledge and equipment to formally test this system, and it is being sold as-is. Approximate overall unpacked dimensions: 44"L x 76"W x 61"H. Learn More
  17. C115278 Anelva SPF-710H Chrome Sputtering System w/(2) RF Generator, Transformer

    $6,000.00
    This Anelva SPF-710H Chrome Sputtering System includes a PRF-503 5kW RF Generator, a 922-9531 1kW RF Generator, and a 4kVA Transformer, as shown. I'm not sure how complete the system is, so please see the photos above for detail. It is missing some of the covers, and I do not have any of the cabling needed to interconnect all of the units together. I do not have the power cords either, so I have no way of powering up or testing this system, or any of its components, and it is being sold as-is. Approximate overall unpacked dimensions: 52"L x 130"L x 71"H. Learn More
  18. C115732 Edwards EV100 Oil Sealed Rotary Vane Vacuum Pump

    $6,000.00
    This Edwards EV100 Oil Sealed Rotary Vane Vacuum Pump is new and unused. It was still factory-sealed in its original box when I got it, but I opened it in order to get pictures and check the contents.

    It comes with a couple bottles of Ultragrade 20 Oil, a Filter/Trap assembly, and Manuals on CD, as shown. Sold as-is.

    Approximate overall dimensions: 30"L x 16"W x 14"H. Learn More
  19. C115989 Ultron Systems USI UH130 Die-Matrix Expander w/ Manual

    $7,000.00
    This Ultron Systems USI UH130 Die-Matrix Expander looks to be in good cosmetic condition, showing some minor signs of wear. It comes with a manual, as shown. It powers up, and the chuck heats up, and responds to input from the buttons. I hooked it up to my air compressor, and the cover assembly latched in place when I pressed the "Clamp" button, and the "Ram" lifted up when I pressed the "Start" button. The lift height of the "Ram" platform can be adjusted using the knob on top next to the chuck. When I pressed the two "Ram Down" buttons simultaneously, the platform sunk back down. However, this is the extent of my testing of this system, and it is being sold as-is. Approximate overall unpacked dimensions: 20"L x 17"W x 20"H. Learn More
  20. C118413 Atis Co. Ltd. C-35 Gold AU Etch Station

    $5,000.00
    This Atis Co. Ltd. AU Etch Station looks to be in good cosmetic condition, showing some signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. It has danger stickers on it for C-35 Gold Etch, and for Methanol. Approximate overall unpacked dimensions: 64"L x 56"H x 83"H. Learn More

    Buy on eBay

  21. C119408 Technical Instrument KMS 310 RT Measurement Microscope 10X 50X 100X 150X

    $20,000.00
    This Technical Instrument Co. model KMS 310 RT Measurement Microscope looks to be in good cosmetic condition, showing some minor signs of wear. It features a Nikon Trinocular Head with CFWN 10x/20 Eyepieces, an AmScope MT300 Video Camera with 30.5mm/c-mount, four Objectives (CF Plan 10X/0.30 ∞/0 EPI WD 16.5, CF Plan 50X/0.80 ∞/0 EPI WD 0.54, CF Plan 100X/0.95 ∞/0 EPI WD 0.3, and CF Plan Apo 150X/0.95 ∞/0 EPI WD 02), a Motorized X-Y Stage and Motorized Z-Axis Focusing Tower with Heidenhain Linear Encoders and a Heidenhain ND 780 3-Axis Digital Position Display Unit, two Joystick Controllers, and a Chui Technical Corp. SLS-150 Fiberoptic Illuminator Light Source, all sitting atop a TMC Optical Breadboard (30" x 60") with Table. This system is missing a second light source, needed to connect to the loose lightguide for the top illuminator. A monitor is also not included for the video camera, which is untested. The system powers up: the Chui Light Source powers up, and illuminates from the bottom; the Heidenhain display powers up, and registers the position of the X-Y Stage and the Z-Focus; one joystick moves the X-Y Stage around, and the other moves the Microscope Head up and down for focusing. I examined some microscope slides under the scope, and the images were sharp and clear. This is the extent of my testing of this system, and it is being sold as-is. Approximate overall unpacked dimensions: 32"L x 62"W x 61"H. Learn More
  22. C140276 K&S 4524-D Digital Manual Gold Ball Wire Bonder 4524D (refurbished)

    $16,000.00
    This K&S (Kulicke & Soffa) model 4524-D Digital Manual Gold Ball Bonder (s/n 760003) looks to be in good cosmetic condition, showing some signs of wear. It is being sold refurbished and in working condition, with a 30-day parts warranty (lower US 48 states only). Please allow 2 to 4 weeks for our technician to go thru the machine and make sure it is performing up to factory specs. It comes with a Leica MS5 StereoZoom Microscope with 10X/21B eyepieces, and a heated workholder, as shown. Approximate overall unpacked dimensions: 29"H x 27"W x 24"L. We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
  23. C147974 West-Bond 35363730F High Frequency Convertible Automatic Wire Bonder

    $55,000.00
    This West-Bond 35363730F-90 High Frequency Convertible Automatic Wire Bonder looks to be in good cosmetic condition. It has recently been refurbished, and is being sold in good working condition. Service and Warranty available for an additional charge. Please contact us for details. It currently has the Ball Bond Head installed (using the same clamps as the 90° Feed Deep Access Wedge Bond Head), but also includes the 45° Feed Wedge Bond Clamps, so it is Three-Way Convertible. We recommend having this machine crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 30"L x 43"W x 53"H. Learn More
  24. C82338 Electroglas 2001X 6" Wafer Prober Probe Station w/ WaferMap Software

    $14,999.99
    This Electroglas 2001X 6" Wafer Prober looks to be in good cosmetic condition, showing some minor signs of wear. The people that we got it from say it is in good working condition. It powers up, as shown in the photos above, and I was able to access for wafermap software and navigate thru various menus and displays. However, I lack the knowledge and equipment to formally test it, and it is being sold as-is. Learn More
  25. C84301 AST Steag Mattson SHS 1000VAC RTP Rapid Thermal Processor

    $25,000.00
    This AST RTP Rapid Thermal Processor (product: SHS, model no. 1000VAC, serial no. 96020197; 208VAC, 3Ph, 60Hz, 43kW) looks to be in cosmetic condition, showing some signs of wear. It is missing one of the back doors. One of the rack-mount chassis on the back of the system was partially pulled out when I received it, and the cover was removed. Upon closer inspection, some of the wires have been disconnected from the back of this module. I lack the knowledge and equipment to formally test this system, and it is being sold as-is. It comes with a box of accessories, including spare cables, valves, boards, etc., as shown. It includes two spare quartz chambers and two 100mm quartz wafer trays, as well as four manuals, as shown. One of the quartz chambers has a small chip out of one of its edges, and the tube on the top has been partially broken on the end (please see the photos for detail). This system comes with everything shown in the photos. I do not have any additional parts or accessories for it. If you do not see it in the photos, it is not included. Approximate overall unpacked dimensions: 62"H x 50"W x 75"L. Learn More
Name
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4