You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. G110357 Wirtz Buehler Phoenix 4000 Sample Preparation System

    $6,000.00
    This Wirtz Buehler Phoenix 4000 Sample Preparation System, Type 49-4101-260, appears to be in fair/good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. The unit could use a good cleaning. The unit IS MISSING ONE RUBBER FOOT. Please look at the photos. This system REQUIRES 220Vac 3-Phase electrical input as well as pneumatic input. The unit powers-up, the table rotates, the head moves up/down, & the fingers move up/down. It also responds to the timer and the RPM settings. This is the only testing that has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 28“L x 26“W x 24“H. Learn More
  2. G113475 Pacific Western Systems PWS P5NMS Semi-Automatic Prober

    $5,000.00
    This Pacific Western Systems PWS P5NMS Semi-Automatic Prober System appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and I was able to move the chuck about with the jog buttons. The chuck will automatically return to home position. The prober has the wafer auto-loader option. The camera & video monitor appear to operate although the picture is red in color, please see the photograph of the date on a penny. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. Included is a CCD Super-Fine CV-950E camera, a Sony Trinitron PVM-14L1 Monitor, a Dolan Jenner Fiber-Lite 180-Series, & an Olympus SZ40 Microscope head with GSWH20/12.5 eyepieces. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 53“L x 45“W x 65“H. Due to the size/weight of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  3. R113433 NJM CLI Packaging Shipper Labeler Fina Touch Print & Apply

    $5,000.00
    This NJM CLI Packaging System Shipper Labeler appears to be in fair cosmetic condition with signs of prior use or wear. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is Please see photos for more detail. Will have to be rewired as when dismantled, some cords have been cut. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Unpacked dims are 39" x 24" x 57" Learn More
  4. C113239 Veeco Dektak SXM Atomic Force Microscope, Equipe Robots, 8" Wafer Chuck

    $50,000.00
    This Veeco Dektak SXM Atomic Force Microscope includes the controller cabinet with computer, as shown. looks to be in good cosmetic condition, showing some signs of wear. It powers up, as shown in the photos above, and I was able to access the computer and software, but I'm really now sure how to test it. Among other things, it features an Equipe ATM Wafer Handling Robot and Prealigner, and it includes a couple manuals, and five CD Tips (one is marked bad), as shown. I lack the knowledge and equipment to formally test this system, and it is being sold as-is. Approximate overall unpacked dimensions: 44"L x 76"W x 61"H. Learn More
  5. C113201 Automation GT Automated Braze Stacking 3-Axis Positioning System

    $3,000.00
    This Automation GT Automated Braze Stacking System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but when I pressed the start button, the stage seemed to try to move in both directions, but could not, and then errors came on the display: "X-Y Alarm" and "X-Y Servo Not On." The stages move smoothly when moved by hand, but I tried auto starting the system a couple more time, and kept getting the same errors. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1200 PLC with Maple Systems Operator Interface Touchpanel Display, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  6. C113200 Automation GT Automated Palletizing TCAG Pallet System w/Stages, Feeders

    $4,000.00
    This Automation GT Automated Palletizing TCAG Pallet System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but the display reports that the "E Stop Activated" and needs to be released. I tried, but was unable to get this message to go away, and I was unable to get the machine to do anything else. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1500 PLC with two DC Input Modules, and two DC Output Modules, a Maple Systems Operator Interface Touchpanel Display, two ATEC-CYL Vibratory Feeders (M0363 and M0364) each with a C210-80 Vibration Generator / Cotroller, a Keyence VG-036T & VG-036R Sensor Assembly with VG-301 Controller, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  7. G113195 Shel Labs 2440-ZZMFG Large Capacity CO2 Incubator w/Handling Robot

    $5,000.00
    This Shel Labs 2440-ZZMFG Large Capacity CO2 Series Incubator, with an internal Handling Robot, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and heated from about 18°C up to about 40°C in about 1 ½ hours. The fan runs smooth & quietly. I do not know how the robot mover is controlled so I am unable to manipulate this part of the incubator. The robot may require a controller module that is not included with this system, I’m not sure. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE A POWER CORD. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 46“L x 40“W x 92“H. Learn More
  8. A113164 Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons

    $4,500.00
    This Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons looks to be in good cosmetic condition with signs of wear and previous use. It powered up as shown and was fully operational prior to removal. I really lack the knowledge and equipment and to test properly so it is being sold as-is. Due to the size of this unit, a custom made pallet(s) will be required to ship it. The cost of the pallet(s) will be paid for by the winning bidder. The cost of the rigging & freight will be paid for by the winning bidder.Ful Learn More

    Buy on eBay

  9. G112936 Guava Technologies Guava EasyCyte Plus w/2 Flow Cells

    $5,000.00
    This Guava Technologies Guava EasyCyte Plus, with 2 Flow Cells & two removal tools and a few ICs, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up, the fan runs smooth & quietly. I could hear the microplate positioner-tray moving about inside the machine, for a few seconds. The microplate positioner trays movements sounded smooth & quiet. There is a green light illuminated on the front panel of the machine. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE ANY CABLES OR CORDS. There is NO SOFTWARE INCLUDED WITH THIS UNIT, I simply don’t have it. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 26“L x 17“W x 16“H. Ebay medical disclaimer: "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." Outback Equipment, (408) 886-3700, 6205 Engle Way, Unit F, Gilroy, California 95020. Learn More
  10. R110945 Jack's Vibratory Packaging Feeders / Labeler

    $5,000.00
    This Jack's Vibratory Feeders / Labeler appears to be in fair cosmetic condition with signs of prior use or wear. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Wires have been cut as shown. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Approximate Unpacked dims are 30" x 36" x 45" Weight listed is approximate - unable to weigh. Learn More
  11. R110947 Anritsu CheckWeigher & Balance SVF Case Weigher KW5728AFNN

    $5,000.00
    This Anritsu SV Series Checkweigher appears to be in fair cosmetic condition with signs of prior use or wear. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Wires have been cut as shown. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Approximate Unpacked dims are 36" x 36" x 56" Weight listed is approximate - unable to weigh. Learn More
  12. A111260 Karl Suss MJB3 Mask Aligner, Type 401001

    $12,000.00
    This Karl Suss MJB3 Mask Aligner, Type 401001 looks to be in decent cosmetic condition with signs of wear and previous use (scratches, paint chips as shown). I could hear it power on, however I really lack the knowledge and equipment to test properly so it is being sold as-is. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18. Unpacked dims 30*24*18. See pictures for more details. Learn More
  13. G134561 South Bay Technology TL-GM1 Technoorg Linda PG49S Gentle Mill Ion Mill

    $25,000.00
    You are looking at a South Bay Technology/Technoorg Linda Gentle Mill Ion Mill, model# TL-GM1 / PG49S. It appears to be in good cosmetic condition showing some signs of previous use. Please refer to the pictures for more detail. It does power on as shown and the digital display came on, the monitor turned on as well but I was unable to get anything to come up on the monitor. This requires a standard 115vac power source. This includes the gentle mill, monitor, keyboard, mouse, fan unit and an AVC 591 CCD Camera. The camera mount has micrometer adjustment. Unfortunately I have no way of testing the full functionality of this item so it is being sold for parts or repair, untested, as is. Please note that this does not include any other parts, cables, or accessories other than as described. The unpacked dimensions of this item are 35Lx28Wx25H. Learn More
  14. V110318 Sumitomo Gear Reducer Paramax MDF 44-BNN-315 (7.5 kw)

    $5,000.00
    This Sumitomo Gear Reducer Paramax MDF 44-BNN-315 (7.5 kw) it looks to be in very good cosmetic conditions with small signs of wear and previous use, possibly unused. The shaft located at one end of the unit, is able to spin by hand. The shaft on the side of the unit does not spin by hand. Since I am not an expert on this type of equipment that was the extent of my testing. I really lack the knowledge and equipment to test properly, so it is being sold as-is. You will receive as shown in the pictures: no other accessories included. Unpacked dims 57*26*29. See pictures for more details. Learn More
  15. R109920 Beckman Coulter Proteomelab PF 2D Protein Fractionation System

    $5,000.00
    This Beckman Coulter Proteomelab PF2D Protein Fractionation System looks to be in good cosmetic condition with signs of wear and previous use. All the units powered on. There is a FC/I Module, HPRP Module, (Two) UV Detector, Fraction Collector, and More as shown. However, I really lack the knowledge and equipment to test any of them properly so they are being sold as-is. Please see photos for more detail. Unpacked dims are 42*27*28. Items come exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Learn More
  16. R109516 Pallet of BioGenic Cryogenic Blood Bag 4-Place Frames & Canisters ZC205

    $5,000.00
    This Pallet Lot of BioGenic Cryogenic Blood Bag 4-Place Frame & Canister (Approximately 736 units) ZC205 / (Approximately 256 units) ZF4-SC025 appear to be in good cosmetic condition, with little to no signs of prior use and wear. I have not done an exact count. I am going by what is written on the side of the boxes. However, I lack the knowledge or equipment to test them so due to no testing, they are being being sold as is. . Please see photos for more detail. 4-PLACE FRAME FOR BAXTER FENWAL 4R9957, CryoMACS 200-074-403, Origen CS750 (750 mL), CharterMed CF-500 Outside Dimensions: INCHES (MM) = 10 (254) x 25.69 (653) x 0.56 (14) CANISTER FOR BAXTER FENWAL BAG 4R9957, CryoMACS 200-074-403, Origen CS750 (750 mL), CharterMed CF-750 Outside Dimensions: INCHES (MM) = 10.94 (278) x 6 (152) x 0.44 (11) Unpacked Dimensions of pallet: 44”x46”x56” Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Learn More
  17. C108387 Chemitronics HD-RD013 Automated UV Irradiation System

    $5,000.00
    This Chemitronics HD-RD013 UV Irradiation System looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the touch panel display is bright and clear, and it responds to input from the buttons. I was able to get all three tracks to start running their process, and all three completed their runs successfully. The system feature six IAI Robo Cylinder Intelligent Actuators, three mounted vertically, and three mounted horizontally. The horizontal ones apparently each hold a wafer-boat full of wafers, and advance step by step, while the three vertical ones extend an arm upwards, grab a wafer, and insert it into the UV chamber above, and then bring it back down after a few moments. Then the process is repeated until all of the wafers have been exposed in the UV chamber. However, this is the extent of my testing of this system, and it is being sold as-is. A Robo Cylinder E-Com RCA-T-ENG Teach Pendant is included to program the three IAI Drivers. Approximate overall unpacked dimensions: 48"L x 40"W x 54"H. Learn More
  18. G108165 Moor Instruments MoorLDI High Resolution Laser Doppler Imager

    $6,000.00
    This Moor Instruments MoorLDI High Resolution Laser Doppler Imager appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and the laser illuminates. This is the only testing that has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working”. This sale includes the laser Doppler imager control, the laser Doppler imager, the software MoorLDI v3.0-H, a flux standard, the connecting cables, a power cord, and a fitted case. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 24“L x 17“W x 17“H. Ebay medical disclaimer: "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." Outback Equipment, (408) 886-3700, 6205 Engle Way, Unit F, Gilroy, California 95020. Learn More
  19. C105027 West-Bond 7400A Ultrasonic Manual Wedge Ribbon Bonder (refurbished)

    $7,500.00
    This West-bond 7400A Manual Ultrasonic/Thermosonic Wedge-Wedge Ribbon Bonder (s/n 9078; 115V, 1A, 50/60Hz) with tool heat looks to be in good cosmetic condition, showing some signs of wear. It is being sold refurbished and in working condition, with a 30-day parts warranty (lower US 48 states only). It comes with everything shown, including an Ultrasonic Generator, a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperature Controller, as shown (the microscope, generator and workholder/controller shown in the photos above are not necessarily the exact ones you will receive; they are shown merely to represent what a complete system will look like). Please allow 2 to 4 weeks for our technician to go thru the machine and make sure it is performing up to factory specs. A $1k deposit is required to begin refurbishment. Approximate overall unpacked dimensions: 24"L x 21"W x 16"H. We recommend having this system shipped in a crate, the cost of which will be the responsibility of the buyer.

    "The Westbond model 7400A is an ultrasonic/thermosonic wedge-wedge wire bonder designed to interconnect wire leads to semi-conductor, hybrid or microwave devices. The machine bonds aluminum or gold wires ranging from 0.0007 in. to 0.002 in. Bonds are made by the wedge-wedge technique using ultrasonic energy to attach aluminum wire at room temperature and adding work piece heat for gold wire. Wire is clamped and threaded diagonally under the bonding wedge, allowing independent feeding action but requiring front-to-back bonding direction. The bonding tool is lifted and lowered manually by the operator using hand/eye reference to the work elevations and to loop height." Learn More
  20. FL107510 Comstron Corporation FS2000B Frequency Synthesizer

    $8,000.00
    You are looking at a Comstron Corporation Frequency Synthesizer, model# FS2000B. It appears to be in fair cosmetic condition showing signs of previous use. Please refer to the pictures for more detail. It does power on as shown in the pictures but the display was stuck at what is shown in the pictures. I do not know the full functionality of this item so it is being sold for either parts or repair. Unfortunately I do not have any way of actually testing out this item and it is being sold untested as is. Please note that this does not include any other parts, cables, or accessories. Learn More
  21. A107450 Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven

    $20,000.00
    This Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven looks to be in good cosmetic condition with signs of wear and wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. Removal/ shipping of this item would require rigging and custom made pallets or crates. The cost will be paid for by the winning bidder. Please see pictures for more details. Learn More
  22. G105723 Etac EHT-K019 Environmental Test Chamber

    $5,000.00
    This Etac EHT-K019 Environmental Test Chamber, RT+40°C- 500°C, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. There is a removable shelf assembly in the unit with 20 shelves. The interior of the unit (without the shelving assembly) measures about 25 ½” inches wide by 17 ¾” inches high by 21 ½” inches deep. I do not have the proper training or tools to power-up this unit for testing, therefore I am obligated to list this unit as untested “Not Working”. This sale does NOT include a power cord. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 90“L x 55“W x 68“H. Due to the size of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  23. G106909 AMR 1000 Scanning Electron Microscope w/Kevex 3212 Spectrometer

    $7,500.00
    This (Advanced Metals Research) AMR 1000 Scanning Electron Microscope, with a Kevex 3212 -SMSIII-V Energy Dispersive Spectrometer & a Unispec System 7000-77 Mainframe & Display Monitor, appears to be in fair cosmetic condition, although there are a several dings, scratches, & signs of previous use. Please look at the photos. The unit does NOT INCLUDE A VACUUM PUMP. There are several cables that are disconnected so I have not tried to power-up the unit. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working, For Parts or Repair”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 101“L x 75“W x 63“H. The system can be shipped on three separate pallets; therefore there is no need for one custom over-sized pallet. Learn More
  24. R117099 GE Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter

    $10,000.00
    This GE Healthcare Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter System appears to be in good cosmetic condition with signs of prior use and wear. However, due to the power requirements, I can not test it in any way. Due to no testing, it is being sold as-is. The unpacked dims are 90" x 89" x 66" 1923lbs Due to the size of this reactor, a custom made pallet will be required to ship it. The custom pallet will be paid for by the winning bidder. Learn More
  25. C147974 West-Bond 35363730F High Frequency Convertible Automatic Wire Bonder

    $55,000.00
    This West-Bond 35363730F-90 High Frequency Convertible Automatic Wire Bonder looks to be in good cosmetic condition. It has recently been refurbished, and is being sold in good working condition. Service and Warranty available for an additional charge. Please contact us for details. It currently has the Ball Bond Head installed (using the same clamps as the 90° Feed Deep Access Wedge Bond Head), but also includes the 45° Feed Wedge Bond Clamps, so it is Three-Way Convertible. We recommend having this machine crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 30"L x 43"W x 53"H. Learn More
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4