You have no items in your shopping cart.

You have no items to compare.

Search
Name
Set Descending Direction

Grid List

10 per page

Items 11 to 20 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. C106869 ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer

    $5,000.00
    This ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the operator interface display is bright and clear. It runs some power-up self-tests, and no errors are reported, but after the system initializes, some alarms start going off, presumably because I do not have it hooked up properly (I hooked it up to power only). I lack the knowledge and equipment to formally test this system, and it is being sold as-is. It comes with an operation manual. Approximate overall unpacked dimensions: 42"L x 42"W x 87"H. Learn More
  2. C108387 Chemitronics HD-RD013 Automated UV Irradiation System

    $5,000.00
    This Chemitronics HD-RD013 UV Irradiation System looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the touch panel display is bright and clear, and it responds to input from the buttons. I was able to get all three tracks to start running their process, and all three completed their runs successfully. The system feature six IAI Robo Cylinder Intelligent Actuators, three mounted vertically, and three mounted horizontally. The horizontal ones apparently each hold a wafer-boat full of wafers, and advance step by step, while the three vertical ones extend an arm upwards, grab a wafer, and insert it into the UV chamber above, and then bring it back down after a few moments. Then the process is repeated until all of the wafers have been exposed in the UV chamber. However, this is the extent of my testing of this system, and it is being sold as-is. A Robo Cylinder E-Com RCA-T-ENG Teach Pendant is included to program the three IAI Drivers. Approximate overall unpacked dimensions: 48"L x 40"W x 54"H. Learn More
  3. C110988 West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder

    $7,500.00
    This West-Bond 4500 Microprocessor Controlled Programmable Ultrasonic Wedge-Wedge Wire Bonder looks to be in good cosmetic condition, showing some minor signs of wear. We have already had it refurbished, so it is fully operational, and ready for shipment. It will include a B&L StereoZoom 4 Microscope and a West-Bond model 1600 Ultrasonic Generator. The pictures that I took of this system before we had it refurbished show it with a model 1400 Ultrasonic Generator, which is not actually compatible with a 4500. The pictures of the system shrink wrapped were take after we had the machine refurbished, and it is wrapped up with a model 1600 Ultrasonic Geneator. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. Approximate overall unpacked dimensions: 24"L x 23"W x 15"H. We usually recommend having bonders crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
  4. C113200 Automation GT Automated Palletizing TCAG Pallet System w/Stages, Feeders

    $4,000.00
    This Automation GT Automated Palletizing TCAG Pallet System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but the display reports that the "E Stop Activated" and needs to be released. I tried, but was unable to get this message to go away, and I was unable to get the machine to do anything else. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1500 PLC with two DC Input Modules, and two DC Output Modules, a Maple Systems Operator Interface Touchpanel Display, two ATEC-CYL Vibratory Feeders (M0363 and M0364) each with a C210-80 Vibration Generator / Cotroller, a Keyence VG-036T & VG-036R Sensor Assembly with VG-301 Controller, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  5. C113201 Automation GT Automated Braze Stacking 3-Axis Positioning System

    $3,000.00
    This Automation GT Automated Braze Stacking System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but when I pressed the start button, the stage seemed to try to move in both directions, but could not, and then errors came on the display: "X-Y Alarm" and "X-Y Servo Not On." The stages move smoothly when moved by hand, but I tried auto starting the system a couple more time, and kept getting the same errors. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1200 PLC with Maple Systems Operator Interface Touchpanel Display, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  6. C113239 Veeco Dektak SXM Atomic Force Microscope, Equipe Robots, 8" Wafer Chuck

    $50,000.00
    This Veeco Dektak SXM Atomic Force Microscope includes the controller cabinet with computer, as shown. looks to be in good cosmetic condition, showing some signs of wear. It powers up, as shown in the photos above, and I was able to access the computer and software, but I'm really now sure how to test it. Among other things, it features an Equipe ATM Wafer Handling Robot and Prealigner, and it includes a couple manuals, and five CD Tips (one is marked bad), as shown. I lack the knowledge and equipment to formally test this system, and it is being sold as-is. Approximate overall unpacked dimensions: 44"L x 76"W x 61"H. Learn More
  7. C115278 Anelva SPF-710H Chrome Sputtering System w/(2) RF Generator, Transformer

    $6,000.00
    This Anelva SPF-710H Chrome Sputtering System includes a PRF-503 5kW RF Generator, a 922-9531 1kW RF Generator, and a 4kVA Transformer, as shown. I'm not sure how complete the system is, so please see the photos above for detail. It is missing some of the covers, and I do not have any of the cabling needed to interconnect all of the units together. I do not have the power cords either, so I have no way of powering up or testing this system, or any of its components, and it is being sold as-is. Approximate overall unpacked dimensions: 52"L x 130"L x 71"H. Learn More
  8. C115732 Edwards EV100 Oil Sealed Rotary Vane Vacuum Pump

    $6,000.00
    This Edwards EV100 Oil Sealed Rotary Vane Vacuum Pump is new and unused. It was still factory-sealed in its original box when I got it, but I opened it in order to get pictures and check the contents.

    It comes with a couple bottles of Ultragrade 20 Oil, a Filter/Trap assembly, and Manuals on CD, as shown. Sold as-is.

    Approximate overall dimensions: 30"L x 16"W x 14"H. Learn More
  9. C115989 Ultron Systems USI UH130 Die-Matrix Expander w/ Manual

    $7,000.00
    This Ultron Systems USI UH130 Die-Matrix Expander looks to be in good cosmetic condition, showing some minor signs of wear. It comes with a manual, as shown. It powers up, and the chuck heats up, and responds to input from the buttons. I hooked it up to my air compressor, and the cover assembly latched in place when I pressed the "Clamp" button, and the "Ram" lifted up when I pressed the "Start" button. The lift height of the "Ram" platform can be adjusted using the knob on top next to the chuck. When I pressed the two "Ram Down" buttons simultaneously, the platform sunk back down. However, this is the extent of my testing of this system, and it is being sold as-is. Approximate overall unpacked dimensions: 20"L x 17"W x 20"H. Learn More
  10. C118413 Atis Co. Ltd. C-35 Gold AU Etch Station

    $5,000.00
    This Atis Co. Ltd. AU Etch Station looks to be in good cosmetic condition, showing some signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. It has danger stickers on it for C-35 Gold Etch, and for Methanol. Approximate overall unpacked dimensions: 64"L x 56"H x 83"H. Learn More

    Buy on eBay

Name
Set Descending Direction

Grid List

10 per page

Items 11 to 20 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5