You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 11 to 20 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. R110947 Anritsu CheckWeigher & Balance SVF Case Weigher KW5728AFNN

    $5,000.00
    This Anritsu SV Series Checkweigher appears to be in fair cosmetic condition with signs of prior use or wear. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Wires have been cut as shown. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Approximate Unpacked dims are 36" x 36" x 56" Weight listed is approximate - unable to weigh. Learn More
  2. A111260 Karl Suss MJB3 Mask Aligner, Type 401001

    $12,000.00
    This Karl Suss MJB3 Mask Aligner, Type 401001 looks to be in decent cosmetic condition with signs of wear and previous use (scratches, paint chips as shown). I could hear it power on, however I really lack the knowledge and equipment to test properly so it is being sold as-is. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18. Unpacked dims 30*24*18. See pictures for more details. Learn More
  3. G134561 South Bay Technology TL-GM1 Technoorg Linda PG49S Gentle Mill Ion Mill

    $25,000.00
    You are looking at a South Bay Technology/Technoorg Linda Gentle Mill Ion Mill, model# TL-GM1 / PG49S. It appears to be in good cosmetic condition showing some signs of previous use. Please refer to the pictures for more detail. It does power on as shown and the digital display came on, the monitor turned on as well but I was unable to get anything to come up on the monitor. This requires a standard 115vac power source. This includes the gentle mill, monitor, keyboard, mouse, fan unit and an AVC 591 CCD Camera. The camera mount has micrometer adjustment. Unfortunately I have no way of testing the full functionality of this item so it is being sold for parts or repair, untested, as is. Please note that this does not include any other parts, cables, or accessories other than as described. The unpacked dimensions of this item are 35Lx28Wx25H. Learn More
  4. V110318 Sumitomo Gear Reducer Paramax MDF 44-BNN-315 (7.5 kw)

    $5,000.00
    This Sumitomo Gear Reducer Paramax MDF 44-BNN-315 (7.5 kw) it looks to be in very good cosmetic conditions with small signs of wear and previous use, possibly unused. The shaft located at one end of the unit, is able to spin by hand. The shaft on the side of the unit does not spin by hand. Since I am not an expert on this type of equipment that was the extent of my testing. I really lack the knowledge and equipment to test properly, so it is being sold as-is. You will receive as shown in the pictures: no other accessories included. Unpacked dims 57*26*29. See pictures for more details. Learn More
  5. R109920 Beckman Coulter Proteomelab PF 2D Protein Fractionation System

    $5,000.00
    This Beckman Coulter Proteomelab PF2D Protein Fractionation System looks to be in good cosmetic condition with signs of wear and previous use. All the units powered on. There is a FC/I Module, HPRP Module, (Two) UV Detector, Fraction Collector, and More as shown. However, I really lack the knowledge and equipment to test any of them properly so they are being sold as-is. Please see photos for more detail. Unpacked dims are 42*27*28. Items come exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Learn More
  6. R109516 Pallet of BioGenic Cryogenic Blood Bag 4-Place Frames & Canisters ZC205

    $5,000.00
    This Pallet Lot of BioGenic Cryogenic Blood Bag 4-Place Frame & Canister (Approximately 736 units) ZC205 / (Approximately 256 units) ZF4-SC025 appear to be in good cosmetic condition, with little to no signs of prior use and wear. I have not done an exact count. I am going by what is written on the side of the boxes. However, I lack the knowledge or equipment to test them so due to no testing, they are being being sold as is. . Please see photos for more detail. 4-PLACE FRAME FOR BAXTER FENWAL 4R9957, CryoMACS 200-074-403, Origen CS750 (750 mL), CharterMed CF-500 Outside Dimensions: INCHES (MM) = 10 (254) x 25.69 (653) x 0.56 (14) CANISTER FOR BAXTER FENWAL BAG 4R9957, CryoMACS 200-074-403, Origen CS750 (750 mL), CharterMed CF-750 Outside Dimensions: INCHES (MM) = 10.94 (278) x 6 (152) x 0.44 (11) Unpacked Dimensions of pallet: 44”x46”x56” Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Learn More
  7. C108387 Chemitronics HD-RD013 Automated UV Irradiation System

    $5,000.00
    This Chemitronics HD-RD013 UV Irradiation System looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the touch panel display is bright and clear, and it responds to input from the buttons. I was able to get all three tracks to start running their process, and all three completed their runs successfully. The system feature six IAI Robo Cylinder Intelligent Actuators, three mounted vertically, and three mounted horizontally. The horizontal ones apparently each hold a wafer-boat full of wafers, and advance step by step, while the three vertical ones extend an arm upwards, grab a wafer, and insert it into the UV chamber above, and then bring it back down after a few moments. Then the process is repeated until all of the wafers have been exposed in the UV chamber. However, this is the extent of my testing of this system, and it is being sold as-is. A Robo Cylinder E-Com RCA-T-ENG Teach Pendant is included to program the three IAI Drivers. Approximate overall unpacked dimensions: 48"L x 40"W x 54"H. Learn More
  8. G108165 Moor Instruments MoorLDI High Resolution Laser Doppler Imager

    $6,000.00
    This Moor Instruments MoorLDI High Resolution Laser Doppler Imager appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and the laser illuminates. This is the only testing that has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working”. This sale includes the laser Doppler imager control, the laser Doppler imager, the software MoorLDI v3.0-H, a flux standard, the connecting cables, a power cord, and a fitted case. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 24“L x 17“W x 17“H. Ebay medical disclaimer: "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." Outback Equipment, (408) 886-3700, 6205 Engle Way, Unit F, Gilroy, California 95020. Learn More
  9. C105027 West-Bond 7400A Ultrasonic Manual Wedge Ribbon Bonder (refurbished)

    $7,500.00
    This West-bond 7400A Manual Ultrasonic/Thermosonic Wedge-Wedge Ribbon Bonder (s/n 9078; 115V, 1A, 50/60Hz) with tool heat looks to be in good cosmetic condition, showing some signs of wear. It is being sold refurbished and in working condition, with a 30-day parts warranty (lower US 48 states only). It comes with everything shown, including an Ultrasonic Generator, a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperature Controller, as shown (the microscope, generator and workholder/controller shown in the photos above are not necessarily the exact ones you will receive; they are shown merely to represent what a complete system will look like). Please allow 2 to 4 weeks for our technician to go thru the machine and make sure it is performing up to factory specs. A $1k deposit is required to begin refurbishment. Approximate overall unpacked dimensions: 24"L x 21"W x 16"H. We recommend having this system shipped in a crate, the cost of which will be the responsibility of the buyer.

    "The Westbond model 7400A is an ultrasonic/thermosonic wedge-wedge wire bonder designed to interconnect wire leads to semi-conductor, hybrid or microwave devices. The machine bonds aluminum or gold wires ranging from 0.0007 in. to 0.002 in. Bonds are made by the wedge-wedge technique using ultrasonic energy to attach aluminum wire at room temperature and adding work piece heat for gold wire. Wire is clamped and threaded diagonally under the bonding wedge, allowing independent feeding action but requiring front-to-back bonding direction. The bonding tool is lifted and lowered manually by the operator using hand/eye reference to the work elevations and to loop height." Learn More
  10. FL107510 Comstron Corporation FS2000B Frequency Synthesizer

    $8,000.00
    You are looking at a Comstron Corporation Frequency Synthesizer, model# FS2000B. It appears to be in fair cosmetic condition showing signs of previous use. Please refer to the pictures for more detail. It does power on as shown in the pictures but the display was stuck at what is shown in the pictures. I do not know the full functionality of this item so it is being sold for either parts or repair. Unfortunately I do not have any way of actually testing out this item and it is being sold untested as is. Please note that this does not include any other parts, cables, or accessories. Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 11 to 20 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5