You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 21 to 30 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. A107450 Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven

    $20,000.00
    This Toray Convection Tunnel Oven Roll to Roll, Clean Room Bake Oven looks to be in good cosmetic condition with signs of wear and wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. Removal/ shipping of this item would require rigging and custom made pallets or crates. The cost will be paid for by the winning bidder. Please see pictures for more details. Learn More
  2. G105723 Etac EHT-K019 Environmental Test Chamber

    $5,000.00
    This Etac EHT-K019 Environmental Test Chamber, RT+40°C- 500°C, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. There is a removable shelf assembly in the unit with 20 shelves. The interior of the unit (without the shelving assembly) measures about 25 ½” inches wide by 17 ¾” inches high by 21 ½” inches deep. I do not have the proper training or tools to power-up this unit for testing, therefore I am obligated to list this unit as untested “Not Working”. This sale does NOT include a power cord. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 90“L x 55“W x 68“H. Due to the size of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  3. G106909 AMR 1000 Scanning Electron Microscope w/Kevex 3212 Spectrometer

    $7,500.00
    This (Advanced Metals Research) AMR 1000 Scanning Electron Microscope, with a Kevex 3212 -SMSIII-V Energy Dispersive Spectrometer & a Unispec System 7000-77 Mainframe & Display Monitor, appears to be in fair cosmetic condition, although there are a several dings, scratches, & signs of previous use. Please look at the photos. The unit does NOT INCLUDE A VACUUM PUMP. There are several cables that are disconnected so I have not tried to power-up the unit. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working, For Parts or Repair”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 101“L x 75“W x 63“H. The system can be shipped on three separate pallets; therefore there is no need for one custom over-sized pallet. Learn More
  4. R117099 GE Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter

    $10,000.00
    This GE Healthcare Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter System appears to be in good cosmetic condition with signs of prior use and wear. However, due to the power requirements, I can not test it in any way. Due to no testing, it is being sold as-is. The unpacked dims are 90" x 89" x 66" 1923lbs Due to the size of this reactor, a custom made pallet will be required to ship it. The custom pallet will be paid for by the winning bidder. Learn More
  5. C147974 West-Bond 35363730F High Frequency Convertible Automatic Wire Bonder

    $55,000.00
    This West-Bond 35363730F-90 High Frequency Convertible Automatic Wire Bonder looks to be in good cosmetic condition. It has recently been refurbished, and is being sold in good working condition. Service and Warranty available for an additional charge. Please contact us for details. It currently has the Ball Bond Head installed (using the same clamps as the 90° Feed Deep Access Wedge Bond Head), but also includes the 45° Feed Wedge Bond Clamps, so it is Three-Way Convertible. We recommend having this machine crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 30"L x 43"W x 53"H. Learn More
  6. C140276 K&S 4524-D Digital Manual Gold Ball Wire Bonder 4524D (refurbished)

    $16,000.00
    This K&S (Kulicke & Soffa) model 4524-D Digital Manual Gold Ball Bonder (s/n 760003) looks to be in good cosmetic condition, showing some signs of wear. It is being sold refurbished and in working condition, with a 30-day parts warranty (lower US 48 states only). Please allow 2 to 4 weeks for our technician to go thru the machine and make sure it is performing up to factory specs. It comes with a Leica MS5 StereoZoom Microscope with 10X/21B eyepieces, and a heated workholder, as shown. Approximate overall unpacked dimensions: 29"H x 27"W x 24"L. We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
  7. S139226 ESI Accuscribe 2600 Laser Wafer Scriber w/ Panasonic Loader

    $25,000.00
    This ESI Accuscribe 2600 Laser Wafer Scriber w/ Panasonic Loader looks to be in excellent condition, showing little signs of wear and previous use. This Accuscribe does not come with a laser. I am able to power on both the Accuscribe and the Panasonic loader. The Accuscribe initializes and I was able to run the software. An image does display on the monitor while running the software. The system lights and internal lights on the Accuscribe all illuminate, but I am unsure how to test this wafer scriber any further. The Panasonic loader has an internal light that illuminates after powering it on and the digital display illuminates as well, but does not display any information since the loader is not properly linked to the Accuscribe. I lack the knowledge and equipment to test this system any further so these units are being sold as-is. Unpacked dims 66x97x86 see pictures for further details. Due to the size and weight of this system, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. Learn More
  8. R135071 Waters Micromass Q-TOF Spectrometer w/ Pump, Lockspray and Ion-Sabre

    $10,000.00
    This Waters Micromass Q-TOF Micro Mass Spectrometer w/ Edwards Pump, Syringe Pump, Lockspray and Ion-Sabre looks to be in good cosmetic condition with signs of prior use or wear. Parts of the unit powered on as I could hear the fans running inside and see a couple of power lights. It runs on both 220v and 115v at the same time. It does come with an Edwards 28 Rotary Vane Vacuum Pump along with a Edwards Turbo pump inside the unit. It also has a Harvard Appartus Model 70-2208 syringe pump, a Micromass Lockspray and an Micromass UK Ion-Sabre unit. The last performance maintenance according to a sticker on the unit, was July 15, 2015. The PM kit # was 201000219. It was due for calibration last July 2016. However, I lack the knowledge or equipment to test it further, so due to little testing, it is being sold as-is. The unpacked dims are 51" x 32" x 30" Learn More
  9. R120867 Vetaphone Corona-Plus Coating System Model VE1AAC4620

    $10,000.00
    This Vetaphone Corona-Plus Coating System Model VE1AAC4620 w/ Manual appears to be in fair cosmetic condition with many signs of prior use or wear. It comes disassembled as shown, and I am not sure if all the pieces are there. Wires have also been cut when disassembled. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Approximate Unpacked dims are 115" x 82" x 60" Weight listed is approximate - unable to weigh. Due to the size of this unit, a custom made pallet might be required to ship it. If needed the custom pallet will be paid for by the winning bidder. Learn More
  10. C119408 Technical Instrument KMS 310 RT Measurement Microscope 10X 50X 100X 150X

    $20,000.00
    This Technical Instrument Co. model KMS 310 RT Measurement Microscope looks to be in good cosmetic condition, showing some minor signs of wear. It features a Nikon Trinocular Head with CFWN 10x/20 Eyepieces, an AmScope MT300 Video Camera with 30.5mm/c-mount, four Objectives (CF Plan 10X/0.30 ∞/0 EPI WD 16.5, CF Plan 50X/0.80 ∞/0 EPI WD 0.54, CF Plan 100X/0.95 ∞/0 EPI WD 0.3, and CF Plan Apo 150X/0.95 ∞/0 EPI WD 02), a Motorized X-Y Stage and Motorized Z-Axis Focusing Tower with Heidenhain Linear Encoders and a Heidenhain ND 780 3-Axis Digital Position Display Unit, two Joystick Controllers, and a Chui Technical Corp. SLS-150 Fiberoptic Illuminator Light Source, all sitting atop a TMC Optical Breadboard (30" x 60") with Table. This system is missing a second light source, needed to connect to the loose lightguide for the top illuminator. A monitor is also not included for the video camera, which is untested. The system powers up: the Chui Light Source powers up, and illuminates from the bottom; the Heidenhain display powers up, and registers the position of the X-Y Stage and the Z-Focus; one joystick moves the X-Y Stage around, and the other moves the Microscope Head up and down for focusing. I examined some microscope slides under the scope, and the images were sharp and clear. This is the extent of my testing of this system, and it is being sold as-is. Approximate overall unpacked dimensions: 32"L x 62"W x 61"H. Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 21 to 30 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5