You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 41 to 50 of 89 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. G115690 Edwards EV160 Oil Sealed Rotary Vane Vacuum Pump

    $6,000.00
    This Edwards EV160 Oil Sealed Rotary Vane Vacuum Pump appears to be in very good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit was up & running in a clean room chase prior to disconnection. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 52“L x 23“W x 34“H. Learn More
  2. C110988 West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder

    $7,500.00
    This West-Bond 4500 Microprocessor Controlled Programmable Ultrasonic Wedge-Wedge Wire Bonder looks to be in good cosmetic condition, showing some minor signs of wear. We have already had it refurbished, so it is fully operational, and ready for shipment. It will include a B&L StereoZoom 4 Microscope and a West-Bond model 1600 Ultrasonic Generator. The pictures that I took of this system before we had it refurbished show it with a model 1400 Ultrasonic Generator, which is not actually compatible with a 4500. The pictures of the system shrink wrapped were take after we had the machine refurbished, and it is wrapped up with a model 1600 Ultrasonic Geneator. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. Approximate overall unpacked dimensions: 24"L x 23"W x 15"H. We usually recommend having bonders crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
  3. G115404 Sloan Dektak 3030 ST Surface Texture Analysis System

    $6,000.00
    This Sloan Dektak 3030 ST Surface Texture Analysis System appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. The unit DOES NOT INCLUDE A STAGE, I simply do not have one for it. The machine has been sitting for some time and should be cleaned & calibrated prior to use. The Scan Head Logic cable shown is not the correct cable and IT IS NOT INCLUDED. Please look at the photos. The system powers-up & illuminates, although this is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. This sale does not include the table/cart shown in the photographs unless otherwise specified. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 25“L x 25“W x 23“H. A custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  4. C115278 Anelva SPF-710H Chrome Sputtering System w/(2) RF Generator, Transformer

    $6,000.00
    This Anelva SPF-710H Chrome Sputtering System includes a PRF-503 5kW RF Generator, a 922-9531 1kW RF Generator, and a 4kVA Transformer, as shown. I'm not sure how complete the system is, so please see the photos above for detail. It is missing some of the covers, and I do not have any of the cabling needed to interconnect all of the units together. I do not have the power cords either, so I have no way of powering up or testing this system, or any of its components, and it is being sold as-is. Approximate overall unpacked dimensions: 52"L x 130"L x 71"H. Learn More
  5. R115385 Encore DJO Surgical Reverse Shoulder Prostesis Humeral Tray 804-99-010

    $5,000.00
    This Encore DJO Surgical Reverse Shoulder Prostesis Humeral Instruments 804-99-010 appears to be in good cosmetic condition, with signs of prior use and wear. It appears to be complete with out any missing parts, but I can't say for sure. However, I lack the knowledge or equipment to test this tray, so due to no testing, it is being sold as is. Unpacked Dimensions: 21”10”x7” Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. “The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.” Outback Equipment Co. 6205 Engle Way, Unit F Gilroy, CA 95020 408-886-3700 Learn More
  6. G100777 Anritsu MD8480C W-CDMA Signalling Tester w/Opt. 02

    $6,000.00
    This Anritsu MD8480C W-CDMA Signalling Tester, with Option 02, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up, although this is the only testing that has been performed. The included cards are as follows, MU848051A CPU, MU848056A Voice Codec, MU848060B TDMA, MU848071C L2, Three MU848072C BTS Units, and MU848073C Timing Generator. This sale does NOT include a power cord. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 23“L inches x 18“W inches x 14“H inches. Learn More
  7. C89006 Dage 2400PC Wire Bond Pull/Ball Shear/Die Shear Tester w/ WP100 Load Cell

    $6,499.99
    This Dage 2400PC Wire Bond Pull/Ball Shear/Die Shear Tester with WP100 Pull Test Load Cell looks to be in good cosmetic condition, showing some signs of wear. It powers up, and seems to be working, although the joystick is having a small problem rotating the head, but this is something my technician should be able to fix. Please allow 2 weeks lead time for us to make these repairs. It was password protected when we first got it, but we were able to bypass this, and access the software. It includes a StereoZoom 4 Micrscope and 10X eyepieces, as shown. Although not shown in the photos, I will include a monitor, keyboard and mouse with the system. Sold as-is. Approximate overall unpacked dimensions: 32"L x 22"W x 20"H. Learn More
  8. C97066 Mech-El 907 / 990 1mil Wire Vertical Feed Wedge Bonder (refurbished)

    $4,999.99
    This system is a Mech-El 1mil Wire Vertical Feed Wedge Bonder, as shown. The label lists the model number as 907, but it is actually a 990, since it is set up with Vertical Feed. It looks to be in good cosmetic condition. We have a technician who refurbishes these machines for us, so we are selling it in working condition. Please allow 2 to 4 weeks for him to go thru the machine to make sure it is performing up to factory specs. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. It comes with a B&L StereoZoom 4 Microscope and a Uthe Ultrasonic Generator, as shown. We recommend having it crated for shipment, the cost of which will be the responsibility of the buyer. 24"L x 20"W x 25"H. Learn More
  9. C97075 Mech-El 990 Vertical Feed Wedge Wire Bonder w/ Tool Heat (refurbished)

    $4,999.99
    This Mech-El 990 Vertical Feed Wedge Wire Bonder with Tool Heat looks to be in good cosmetic condition. It features high temperature solenoids, and can be used with either 1/2 inche or 2 inch spools of wire. We have a technician who refurbishes these machines for us, so we are selling it in working condition. Please allow 2 to 4 weeks for him to go thru the machine to make sure it is performing up to factory specs. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. It comes with a B&L StereoZoom 4 Microscope and a Uthe Ultrasonic Generator (although the ones shown might not be the exact ones you recieve, but they will be in good working condition). We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 24"L x 20"W x 25"H. Learn More
  10. C93343 Orthodyne 20R Ultrasonic Ribbon Wire Bonder (refurbished)

    $9,499.99
    This Orthodyne 20R Ultrasonic Ribbon Wire Bonder looks to be in good cosmetic condition, showing some minor signs of wear. It features a Nikon SMZ-1 Stereo Zoom Microscope (0.7X to 3.0X) and a pair of Nikon 15X/14 Eyepieces. We are selling this bonder in working condition. We have a technician who refurbishes these for us, but it could take three months to getting it fully functional (parts take 12 weeks from Orthodyne). We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 41 to 50 of 89 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7