You have no items in your shopping cart.

You have no items to compare.

Search
Price
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. C113201 Automation GT Automated Braze Stacking 3-Axis Positioning System

    $3,000.00
    This Automation GT Automated Braze Stacking System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but when I pressed the start button, the stage seemed to try to move in both directions, but could not, and then errors came on the display: "X-Y Alarm" and "X-Y Servo Not On." The stages move smoothly when moved by hand, but I tried auto starting the system a couple more time, and kept getting the same errors. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1200 PLC with Maple Systems Operator Interface Touchpanel Display, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  2. C113200 Automation GT Automated Palletizing TCAG Pallet System w/Stages, Feeders

    $4,000.00
    This Automation GT Automated Palletizing TCAG Pallet System looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as shown in the photos above, but the display reports that the "E Stop Activated" and needs to be released. I tried, but was unable to get this message to go away, and I was unable to get the machine to do anything else. However, this is the extent of my testing of this system, and it is being sold as-is. Among other things, it features a Yamaha FXYX 2-Axis Motorized Positioning Stage with RCX222 Driver, an Allen-Bradley MicroLogix 1500 PLC with two DC Input Modules, and two DC Output Modules, a Maple Systems Operator Interface Touchpanel Display, two ATEC-CYL Vibratory Feeders (M0363 and M0364) each with a C210-80 Vibration Generator / Cotroller, a Keyence VG-036T & VG-036R Sensor Assembly with VG-301 Controller, and some assorted sensors and SMC Air Actuators, as shown. Approximate overall unpacked dimensions: 42"L x 61"W x 82"H. Learn More
  3. C97037 West-Bond Westbond 7200AA Pick & Place Epoxy Die Bonder (refurbished)

    $4,499.99
    This Westbond 7200AA Pick & Place Epoxy Die Bonder looks to be in good cosmetic condition. We have a technician who refurbishes these machines for us, so we are selling it in working condition. Please allow 2 to 4 weeks for him to go thru the machine to make sure it is performing up to factory specs. It comes with a B&L StereoZoom 4 Microscope, as shown. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 22"L x 21"W x 15"H. Learn More
  4. A113164 Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons

    $4,500.00
    This Arburg Allrounder 221-75-350 Injection Molding Machine, 35 Tons looks to be in good cosmetic condition with signs of wear and previous use. It powered up as shown and was fully operational prior to removal. I really lack the knowledge and equipment and to test properly so it is being sold as-is. Due to the size of this unit, a custom made pallet(s) will be required to ship it. The cost of the pallet(s) will be paid for by the winning bidder. The cost of the rigging & freight will be paid for by the winning bidder.Ful Learn More

    Buy on eBay

  5. C97066 Mech-El 907 / 990 1mil Wire Vertical Feed Wedge Bonder (refurbished)

    $4,999.99
    This system is a Mech-El 1mil Wire Vertical Feed Wedge Bonder, as shown. The label lists the model number as 907, but it is actually a 990, since it is set up with Vertical Feed. It looks to be in good cosmetic condition. We have a technician who refurbishes these machines for us, so we are selling it in working condition. Please allow 2 to 4 weeks for him to go thru the machine to make sure it is performing up to factory specs. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. It comes with a B&L StereoZoom 4 Microscope and a Uthe Ultrasonic Generator, as shown. We recommend having it crated for shipment, the cost of which will be the responsibility of the buyer. 24"L x 20"W x 25"H. Learn More
  6. C88866 Vacuum Chamber Motorized X-Y Linear Positioning Stage w/Anorad Controller

    $4,999.99
    This assembly is composed of a Motorized X-Y Linear Positioning Stage, mounted inside a Vacuum Chamber, which is mounted atop a Vibration Isolation Table. It also features an Anorad Controller, some Cabling, and a Physik Instrumente typ E507.00 HVPZT-Amplifier, which connects to some sensors on the stage. These items look to be in good cosmetic condition, showing some signs of wear. The stage slides smoothly by hand, however I have no way of formally testing it. The Anorad controller does power up, and its fan comes on, and its power lights illuminate. However, this is the extent of my testing of these items, and they are being sold as-is. The top axis of the stage provides approximately 9-1/4 inches of travel, and the bottom axis of the stage provides approximately 19-3/4" of travel. Approximate overall unpacked dimensions: 71"L x 47"W x 54"H. Learn More
  7. C97075 Mech-El 990 Vertical Feed Wedge Wire Bonder w/ Tool Heat (refurbished)

    $4,999.99
    This Mech-El 990 Vertical Feed Wedge Wire Bonder with Tool Heat looks to be in good cosmetic condition. It features high temperature solenoids, and can be used with either 1/2 inche or 2 inch spools of wire. We have a technician who refurbishes these machines for us, so we are selling it in working condition. Please allow 2 to 4 weeks for him to go thru the machine to make sure it is performing up to factory specs. We can offer a 30-day parts warranty to the 48 contiguous US States only. If it is to be shipped overseas, it can be inspected here at our warehouse before shipment, but once it ships, it is as-is. It comes with a B&L StereoZoom 4 Microscope and a Uthe Ultrasonic Generator (although the ones shown might not be the exact ones you recieve, but they will be in good working condition). We recommend having the bonder crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 24"L x 20"W x 25"H. Learn More
  8. G113195 Shel Labs 2440-ZZMFG Large Capacity CO2 Incubator w/Handling Robot

    $5,000.00
    This Shel Labs 2440-ZZMFG Large Capacity CO2 Series Incubator, with an internal Handling Robot, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and heated from about 18°C up to about 40°C in about 1 ½ hours. The fan runs smooth & quietly. I do not know how the robot mover is controlled so I am unable to manipulate this part of the incubator. The robot may require a controller module that is not included with this system, I’m not sure. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE A POWER CORD. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 46“L x 40“W x 92“H. Learn More
  9. G113475 Pacific Western Systems PWS P5NMS Semi-Automatic Prober

    $5,000.00
    This Pacific Western Systems PWS P5NMS Semi-Automatic Prober System appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and I was able to move the chuck about with the jog buttons. The chuck will automatically return to home position. The prober has the wafer auto-loader option. The camera & video monitor appear to operate although the picture is red in color, please see the photograph of the date on a penny. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. Included is a CCD Super-Fine CV-950E camera, a Sony Trinitron PVM-14L1 Monitor, a Dolan Jenner Fiber-Lite 180-Series, & an Olympus SZ40 Microscope head with GSWH20/12.5 eyepieces. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 53“L x 45“W x 65“H. Due to the size/weight of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  10. C106869 ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer

    $5,000.00
    This ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the operator interface display is bright and clear. It runs some power-up self-tests, and no errors are reported, but after the system initializes, some alarms start going off, presumably because I do not have it hooked up properly (I hooked it up to power only). I lack the knowledge and equipment to formally test this system, and it is being sold as-is. It comes with an operation manual. Approximate overall unpacked dimensions: 42"L x 42"W x 87"H. Learn More
Price
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5