You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 176 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. G110293 Parker Daedal 3-Axis Positioning Linear Stage

    $1,500.00
    This Parker Daedal Motorized 3-Axis Positioning Linear Stage appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The X & Y Axis are both Parker model 402006LNMP-D3L3C4M1 and they have about 6” inches of travel. The Z axis is a model number 402004LNMP-D3L3C4M1 and it can travel approximately 4” inches. The lead-screws are an Acme type thread. Each axis has a Parker Compumotor OS21A-DNL10 1.8° stepper motor attached. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 19“L x 19“W x 20“H. Learn More
  2. C114281 ESI 2-Axis Linear Motor Motorized Positioning Stage, BEI Linear Actuator

    $4,000.00
    This lot includes two ESI Magnetic Linear Motor Motorized Positioning Stages, along with an ESI B.P. Power Amplifiers Chassis, and ESI B.P. High Voltage Power Supply, and some cabling, as shown. These stages were removed from an ESI 9200 system. They look to be in good cosmetic condition, showing some signs of wear. The cover to the upper axis assembly got a little bent, and one of the screws stripped, when we were removing it from the machine, but otherwise everything looks to be in pretty good shape. The power supply and amplifier chassis power up. However, I lack the knowledge and equipment to formally test these items, and they are being sold as-is. The bottom stage features an 8" Wafer Vacuum Chuck, and a couple glass encoder scales. An Optical Encoder assembly is also included, which is supposed to be mounted opposite one of the glass encoder scales. The upper stage assembly is to be mounted over the bottom wafer stage, and moves side to side. It also features a BEI Systems Co. Kimco Magnetics Division LA14-15A Linear Actuator, which apparently provides Z-Axis motion. Sold as-is. Approximate overall unpacked dimensions: 48"L x 40"W x 28"H. Learn More
  3. G117061 Edwards STP iXR4506C Turbomolecular Vacuum Pump 24,240-RPM

    $12,000.00
    This Edwards STP iXR4506C Turbomolecular Vacuum Pump, with a rated speed of 24,240-RPM, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The rotor spins freely. I do not have the equipment or training to power-up & formally test this item, so it is being sold as is. The unpacked dimensions of this item are approximately 21“L x 19“W x 18“H. Learn More
  4. G97410 Alessi REL-4500 6" Prober & Hypervision Visionary 2 Microscope

    $9,999.99
    This Hypervision Visionary 2 Microscope with an Alessi REL-4500 6" Prober, with smooth moving X,Y, Z, & Theta axes, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. It features Mitutoyo objectives, Mplan NIR20, NIR100, and NIR5 along with a Hyper lens. It comes with all the features shown in the pictures. The prober also comes with a Xybion Electronic Systems camera, Olympus TGH light power supply, and a Tektronix K475 cart with NEC monitor and Industrial PC-610 computer. It also has a Sony PVM-1342Q color monitor (although I was unable to get a picture) and an Alessi ECJ-06 controller and joystick. You'll also receive a Polaroid freeze frame video recorder as shown in the pictures. The item powered up, however I really lack the knowledge and equipment to test properly so it is being sold as-is. This prober and other accessories would need to be cleaned very well & connected correctly in order to function properly. Please see the photographs for more detail. The unpacked dimensions of the Hypervision microscope box are 38”L x 38”W x 41”H and the unpacked dimensions of the Tektronix K475 cart are 35“L x 26“W x 70“H. Learn More
  5. C89006 Dage 2400PC Wire Bond Pull/Ball Shear/Die Shear Tester w/ WP100 Load Cell

    $6,499.99
    This Dage 2400PC Wire Bond Pull/Ball Shear/Die Shear Tester with WP100 Pull Test Load Cell looks to be in good cosmetic condition, showing some signs of wear. It powers up, and seems to be working, although the joystick is having a small problem rotating the head, but this is something my technician should be able to fix. Please allow 2 weeks lead time for us to make these repairs. It was password protected when we first got it, but we were able to bypass this, and access the software. It includes a StereoZoom 4 Micrscope and 10X eyepieces, as shown. Although not shown in the photos, I will include a monitor, keyboard and mouse with the system. Sold as-is. Approximate overall unpacked dimensions: 32"L x 22"W x 20"H. Learn More
  6. G96881 Asymtek A-612C Dispensing System

    $9,999.99
    This Asymtek Dispensing System, model number A-612C, appears to be in good cosmetic condition, although there are a few dings and scratches, signs of previous use. Please look at the photos. The unit powers-up, the interior lights come on as well as lights on the operators panel. The computer powers-up and appears to go through its boot-up cycle properly. The computer then requests that you choose from various options to maneuver to the exact place in the software that you want to be. There is a Pulnix machine vision camera, with an illuminator ring, attached to the head unit. I was able to zero return all three axis. Then I was also able to manually move all three axis around the table in rapid traverse or feed modes. There are a few hand tools included as well as three sets of software disks, please see the photos. I was not able to get the camera to work but this is probably due to my inexperience. I do not have the equipment or training to formally test this item so it is being sold as is. Due to the size/weight of this item, freight shipping arrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Due to the size of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate will be paid for by the winning bidder. Learn More
  7. C97059 Agilent 16950A 600MHz State/4GHz Timing Zoom/1Meg Memory Logic Analyzer

    $1,999.99
    This Agilent 16950A 600MHz State / 4GHz Timing Zoom Plug-In Card with 1Meg Memory Depth (s/n MY44001625) looks to be in excellent cosmetic condition. It is in good working condition, and comes with a Calibration Certificate and Sticker (Calibration Date: Feb 19, 2008; In Service Date: Mar 26, 2008, Calibration Due Date: Mar 26, 2010). It comes with assorted accessories, as shown, including ground leads, grabber clips, interconnect cables, installation guide, software certificate and software CD, and an E5382A Single Ended Flying Lead Set with User’s manual (see the last photo above for a complete list of accessories). Learn More
  8. C111568 MicroVision SpotSeeker 30 Motorized Positioning Display Analysis System

    $1,000.00
    This MicroVision SpotSeeker 30 Multiple-Axis Motorized Positioning Display Analysis System features an Olympus Q-Color 3 Video Camera with Edmund Industrial Optics 75mm F4 Lens, as shown. The motorized positioning stage is composed of three motorized stages, one for side to side (X-Axis) travel, one for up and down (Z-Axis) travel, and the camera mount is attached to a smaller stage, providing Y-Axis travel. This 3-Axis motorized positioning stage is mounted to a pair of slide rails, which are mounted to the table, so these provide manual Y-Axis (forward and back) travel. The Camera can also be swiveled from side to side, so this provides another Axis of motion. The MicroVision stage assembly powers up, and the power light illuminates. However, I do not have any way of actually making the motorized stages to move. I lack the knowledge and equipment to formally test this system, or the video camera, and it is being sold as-is. It comes with a manual, as shown. I do not have any other parts or accessories for this system, so if you don't see it in the photos, it is not included. Approximate overall unpacked dimensions: 61"L x 25"W x 63"H. Due to the size of this system, a custom pallet may be required to ship it, the cost of which will be the responsibility of the buyer. Learn More
  9. G114666 Beckman Coulter Synchron LX20 Clinical System Parts/Repair

    $1,500.00
    This Beckman Coulter Synchron LX20 Clinical System, for Parts or Repair, with the computer, monitor, keyboard, & mouse, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit Synchron LX20 has had some parts removed and we are not comfortable trying to power-up the unit so it is untested. The computer powers-up, shows the Simplify Automate Innovate software. The computer progresses through a system test sequence until it gets to a point where it is testing hardware diagnostics and it simply stays at that point. I believe that the LX20 needs to be powered-up and connected to the computer so the software can actually test the hardware. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE A POWER CORD. This sale does not include the table/cart under the computer, shown in the photographs unless otherwise specified. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 73“L x 44“W x 61“H. Learn More
  10. R120867 Vetaphone Corona-Plus Coating System Model VE1AAC4620

    $10,000.00
    This Vetaphone Corona-Plus Coating System Model VE1AAC4620 w/ Manual appears to be in fair cosmetic condition with many signs of prior use or wear. It comes disassembled as shown, and I am not sure if all the pieces are there. Wires have also been cut when disassembled. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Approximate Unpacked dims are 115" x 82" x 60" Weight listed is approximate - unable to weigh. Due to the size of this unit, a custom made pallet might be required to ship it. If needed the custom pallet will be paid for by the winning bidder. Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 176 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5