This Leco Pegasus IV TOF MS w/ Agilent 6890N Network Gas Chromatograph System is in good cosmetic condition with scuffs and scratches present. There is also some staining present, mostly on top of the 6890N unit. There are a number of disconnected cables on both units, unknown if they're meant to be connected to one another or other missing parts. I was able to power on both units using 230V AC power (cables not included). The 6890N was responsive to button presses and I was able to access various menus, the oven also appeared to be able to heat as shown. The Pegasus IV unit powered on and fans were heard running, however this was the extent of my testing. I do not have the knowledge or equipment to fully test this unit, so it is sold As-Is. Learn More

This Haimer TD 1002 Tool Dynamic 1002 Balancing Machine looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, and the digital display is bright and clear, and it responds to input from the buttons. I was able to run it through some of its test cycles, and the air-actuated pin in the center of the rotor raised up, and the rotor started spinning really fast, and the display reported the results. However, this is the extent of my testing of this system, and it is being sold as-is. It comes with a Stand of some sort (missing one of the three feet), a CAT 40-5/8" 80.201.340.01.IN Adapter, an FH01-13 Insert (405.2gmm / 0 Grad 9.054g / 328.2gmm), and it has an HSK-E50 80.201.E50.00 Adapter Installed. Learn More

This Weiss WK-2500/60-S Klima Climate Climatic Environmental Test Chamber looks to be in good cosmetic condition, showing some signs of wear. However, we do not have any way of powering it up or testing it at our warehouse, and it is being sold as-is. Some of the internal chamber panels have been removed, as shown. Approximate internal chamber dimensions: 52"L x 43.5"W x 67"H. Approximate overall unpacked dimensions: 160"L x 74"W x 101"H. Learn More

This KDF 603NT Sputtering System (Power: DC 12kW, RF 1.25kW; Utilities: 208VAC, 3Ph, 100A, 50-60Hz, 80-100psi Air, 60-90psi Water) looks to be in good cosmetic condition, showing some signs of wear. Among other things, it features a CTI Cryo-Torr 8 Cryopump with 8200 Compressor, an Edwards E2M40 Two Stage Vacuum Pump (A36402982X5) with 2hp 190-230/380-460VAC 3Ph Motor, an Advanced Energy RFXII 1250 RF Power Supply, a Veeco AVC 1000 Automatic Valve Controller, and a Control Cabinet with Advance Energy MDX Pinnacle RF Power Supply, an APC PowerStack 450 UPS, a VAT PM-5 Adapter Pressure Controller, and a Programmable Logic Controller, as shown. It is MISSING the Computer/Keyboard/Mouse, but still has the Flat Panel Monitor. The "Au Upsilon" Gold Target has been removed, and is NOT included. The other two targets (W/10Ti and Tantalum) appear to be present, as shown in the photos. This system was decommissioned by Clean Harbors, so all fluids have been drained, including the oil from the Edwards pump, and the Helium from the CTI compressor. I have no way of testing this system, or any of its components, and it is being sold as-is. An MKS 925 MicroPirani Transducer, a Balluff Linear Position Sensor, and a KDF Cryogenic Temperature Sensor Display, all on the back of the main unit, have been damaged (please see picture links below for detail). Approximate overall unpacked dimensions of the Main Unit: 45"L x 79"W x 73"H. Approximate overall unpacked dimensions of the Electronics Cabinet: 37"L x 24"W x 83"H. Due to the size and weight of this system, a custom pallet or crate may be required to ship it, the cost of which will be the responsibility of the buyer. Learn More

Edwards NRF463000 Neptune Process Gas Abatement System (208V, 25A, 3Ph, mfd. 2015) was working when pulled from service as part of an Applied Materials Gen5 System. It looks to be in excellent condition, still wrapped and strapped since its de-installation. The last photo above shows a stock photo of what the system looks like unwrapped. Sold as-is. Approximate overall dimensions of main unit: 68"L x 68"W x 120"H. Approximate overall dimensions of extension unit: 72"L x 54"W x 120"H. Learn More

You are looking at a Nikon NRC-504 Reticle Cleaner. It has an Ebara Jitsugyo EG-2001 Ozone Monitor. Nikon Laser Power Supply. Material Handling Robot. I do not know the brand or model because I cannot fully access it. Moyo Rikagu FMA-4UR NDIR Gas Alarm Meter. Tokyo Keiso Flow Regulators. SPC Electronics USG-301H-3AS Ultrasonic Genrator. Kidde Extinguishing Unit. Computer and Manuals. Learn More

NPC Incorporated LM-A-1400x200 Solar Production Laminator with Conveyor. It looks to be in good cosmetic condition with signs of wear and previous use. One area is missing circuit breakers as shown, however I lack the knowledge and equipment to fully test the item so it is being sold as-is. Due to the size and weight, all costs related to rigging and logistics will be paid for by the buyer. Learn More

Plasmatherm SLR 730 PECVD /720 RIE • Stand alone Dual chamber 720/720 Deposition & Etch system • PC controlled–windows based system • Plasmatherm 700 Aluminum body chamber • Load Lock Version with (2) two process modules • One PECVD • One RIE (Reactive Ion Etch) • Main body of system (shared components between the two chambers) includes • Stainless Steel Skins • Windows based PC controls • Advanced Energy RFPP - RF5S power supply (500W – 13.56MHz) • Advanced Energy AM5 matching network w/tuner • Leybold D25 or equivalent Load Lock pump • Neslab HX 75 chiller with RS232 interface to system • Electrical Disconnect box - 208V, 3 phase, 60amp • Flat panel display with keyboard & mouse • Full set of manuals • PECVD Module includes • Heated Chuck • Watlow controller • 11” chuck with center lift type • Optical Windows for Endpoint Control & diagnostics • Leybold D40 with 151 blower (min.) Mechanical pump • MKS 290 Ion Gauge controller and Ion gauge • MKS TC gauge controller • 1 or 2 Torr Baratron • 4 gas MFC’s • RIE module includes • Lower electrode • 11” showerhead • 11” chuck – center lift type • Optical Windows for Endpoint Control & diagnostics • Soffie Class III Laser endpoint detector • MKS 153 Throttle valve • Leybold 361C turbo pump • Leybold 150/360 NT turbo controller • Leybold D40BCS mechanical roughing pump • 500mT Baratron • 4 gas MFC’s Specification from a quotation when the University upgraded the system after the original purchase Gas Manifolds and Gas line fabrication and installation service • Fabricate & install (4) additional gas sticks/lines including Nupro valves, (with bypass valves included), unions, glands, VCR fittings, MFCs and gas manifolds in order to serve the existing Plasmatherm Dual Chamber PECVD/RIE System as listed below. • (2) - 4 port manifolds • (2) - gas sticks for Nitrogen and Argon to include nupro valve, mfc and "L" leg to gas connection • (2) - gas sticks with bypass (highly recommended for Cl2 and BCl3), to include 3 nupro valves and mfc • 2 - 4 channel valve control PCB (for the nupro valves) • 1/8" tubing for the nupro valves (~40 ft) • Re-wiring of the valve control PCB connectors to support this up-fit, plugs, pins and wire as necessary • JVIC will need to move the N2 purge inlet connection to its new location (to support the addition of the 4 port manifold • MFCs will be cleaned and calibrated to Nitrogen for the following flow rates • (2) for the PECVD side of the system • Nitrogen – 2000 sccm • Argon – 500 sccm • (2) for the RIE side of the system • BCL3 - 50 sccm • Cl2 – 50 sccm Learn More