You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 14 total

Page:
  1. 1
  2. 2
  1. G100834 Thermonics T-2500BE Precision Temperature Forcing System

    $6,999.99
    This Thermonics T-2500BE Precision Temperature Forcing System appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. There is NO ARM INCLUDED WITH THIS UNIT. Please look at the photos. The unit powers-up, although this is the only testing that has been performed, therefore I am obligated to list this unit as “Not Working”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 35“L inches x 33“W inches x 57“H inches. Learn More
  2. R136734 Beckman GS-6R Centrifuge w/ Rotor & Microplus Carriers (COMING SOON)

    $5,000.00
    This Beckman CS-6R Centrifuge w/ Rotor & Microplus Carriers looks to be in fair cosmetic condition with many signs of prior use or wear. It powered on, spun, cooled down to set point, and it appears that the timer works. The unpacked dims are 30" x 28" x 16" Learn More
  3. R136733 MJ Research DTC-200 DNA Gradient Peltier Thermal Cycler (COMING SOON)

    $5,000.00
    This MJ Research DTC-200 DNA Gradient Peltier Thermal Cycler looks to be in fair cosmetic condition with some signs of prior use or wear. It powered on and went through several cycles when prompted. (See Photos of the different screens.) The unpacked dims are 13" x 10" x 10" Learn More
  4. R118555 Modutek Corp MyKrolis 8' Megasonic Ultrasonic Wet Bench

    $10,000.00
    This Modutek Corp MyKrolis 8' Megasonic Wet Bench is in fair cosmetic condition with signs of prior use or wear. However, I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is The approx. unpacked Size of this item is 96"x 40"x70". 2500lbs Due to the size of this sink, a custom made pallet will be required to ship it. The custom pallet will be paid for by the winning bidder. The approximate cost of the pallet will be around $200.00 Learn More
  5. R117099 GE Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter

    $10,000.00
    This GE Healthcare Wave Biotech 500 / 1000 Base500EH Cell Expansion Bioreacter System appears to be in good cosmetic condition with signs of prior use and wear. However, due to the power requirements, I can not test it in any way. Due to no testing, it is being sold as-is. The unpacked dims are 90" x 89" x 66" 1923lbs Due to the size of this reactor, a custom made pallet will be required to ship it. The custom pallet will be paid for by the winning bidder. Learn More
  6. R115437 Kruss Automated Process Interfacial Force Tensiometer K100 Mk2

    $6,500.00
    This Kruss Automated Process Interfacial Force Tensiometer K100 Mk2 appears to be in good cosmetic condition with some signs of prior use or wear. It powered on as shown, however, I lack the knowledge or equipment to test it further, so due to little testing, it is being sold as-is. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. Unpacked wt. and dims are 12" x 15" x 23" Learn More
  7. G134561 South Bay Technology TL-GM1 Technoorg Linda PG49S Gentle Mill Ion Mill

    $25,000.00
    You are looking at a South Bay Technology/Technoorg Linda Gentle Mill Ion Mill, model# TL-GM1 / PG49S. It appears to be in good cosmetic condition showing some signs of previous use. Please refer to the pictures for more detail. It does power on as shown and the digital display came on, the monitor turned on as well but I was unable to get anything to come up on the monitor. This requires a standard 115vac power source. This includes the gentle mill, monitor, keyboard, mouse, fan unit and an AVC 591 CCD Camera. The camera mount has micrometer adjustment. Unfortunately I have no way of testing the full functionality of this item so it is being sold for parts or repair, untested, as is. Please note that this does not include any other parts, cables, or accessories other than as described. The unpacked dimensions of this item are 35Lx28Wx25H. Learn More
  8. G113195 Shel Labs 2440-ZZMFG Large Capacity CO2 Incubator w/Handling Robot

    $5,000.00
    This Shel Labs 2440-ZZMFG Large Capacity CO2 Series Incubator, with an internal Handling Robot, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up and heated from about 18°C up to about 40°C in about 1 ½ hours. The fan runs smooth & quietly. I do not know how the robot mover is controlled so I am unable to manipulate this part of the incubator. The robot may require a controller module that is not included with this system, I’m not sure. This is the only testing that has been performed. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE A POWER CORD. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 46“L x 40“W x 92“H. Learn More
  9. G112936 Guava Technologies Guava EasyCyte Plus w/2 Flow Cells

    $5,000.00
    This Guava Technologies Guava EasyCyte Plus, with 2 Flow Cells & two removal tools and a few ICs, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. The unit powers-up, the fan runs smooth & quietly. I could hear the microplate positioner-tray moving about inside the machine, for a few seconds. The microplate positioner trays movements sounded smooth & quiet. There is a green light illuminated on the front panel of the machine. Since I am unable to formally test it or verify functionality/calibration, I am obligated to list this unit as “Not Working”. THIS SALE DOES NOT INCLUDE ANY CABLES OR CORDS. There is NO SOFTWARE INCLUDED WITH THIS UNIT, I simply don’t have it. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 26“L x 17“W x 16“H. Ebay medical disclaimer: "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." Outback Equipment, (408) 886-3700, 6205 Engle Way, Unit F, Gilroy, California 95020. Learn More
  10. G110357 Wirtz Buehler Phoenix 4000 Sample Preparation System

    $6,000.00
    This Wirtz Buehler Phoenix 4000 Sample Preparation System, Type 49-4101-260, appears to be in fair/good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. The unit could use a good cleaning. The unit IS MISSING ONE RUBBER FOOT. Please look at the photos. This system REQUIRES 220Vac 3-Phase electrical input as well as pneumatic input. The unit powers-up, the table rotates, the head moves up/down, & the fingers move up/down. It also responds to the timer and the RPM settings. This is the only testing that has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as “Not Working”. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 28“L x 26“W x 24“H. Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 14 total

Page:
  1. 1
  2. 2