You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2
  1. G97410 Alessi REL-4500 6" Prober & Hypervision Visionary 2 Microscope

    $9,999.99
    This Hypervision Visionary 2 Microscope with an Alessi REL-4500 6" Prober, with smooth moving X,Y, Z, & Theta axes, appears to be in good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. Please look at the photos. It features Mitutoyo objectives, Mplan NIR20, NIR100, and NIR5 along with a Hyper lens. It comes with all the features shown in the pictures. The prober also comes with a Xybion Electronic Systems camera, Olympus TGH light power supply, and a Tektronix K475 cart with NEC monitor and Industrial PC-610 computer. It also has a Sony PVM-1342Q color monitor (although I was unable to get a picture) and an Alessi ECJ-06 controller and joystick. You'll also receive a Polaroid freeze frame video recorder as shown in the pictures. The item powered up, however I really lack the knowledge and equipment to test properly so it is being sold as-is. This prober and other accessories would need to be cleaned very well & connected correctly in order to function properly. Please see the photographs for more detail. The unpacked dimensions of the Hypervision microscope box are 38”L x 38”W x 41”H and the unpacked dimensions of the Tektronix K475 cart are 35“L x 26“W x 70“H. Learn More
  2. C106869 ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer

    $5,000.00
    This ATMI Ecosys Phoenix Hydrogen Active Flame Thermal Oxidizer looks to be in good cosmetic condition, showing some signs of wear. It powers up, and the operator interface display is bright and clear. It runs some power-up self-tests, and no errors are reported, but after the system initializes, some alarms start going off, presumably because I do not have it hooked up properly (I hooked it up to power only). I lack the knowledge and equipment to formally test this system, and it is being sold as-is. It comes with an operation manual. Approximate overall unpacked dimensions: 42"L x 42"W x 87"H. Learn More
  3. A106172 Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll

    $20,000.00
    This Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll looks to be in good cosmetic condition with signs of wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. The weight and dims are approximates. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder Learn More
  4. G96881 Asymtek A-612C Dispensing System

    $9,999.99
    This Asymtek Dispensing System, model number A-612C, appears to be in good cosmetic condition, although there are a few dings and scratches, signs of previous use. Please look at the photos. The unit powers-up, the interior lights come on as well as lights on the operators panel. The computer powers-up and appears to go through its boot-up cycle properly. The computer then requests that you choose from various options to maneuver to the exact place in the software that you want to be. There is a Pulnix machine vision camera, with an illuminator ring, attached to the head unit. I was able to zero return all three axis. Then I was also able to manually move all three axis around the table in rapid traverse or feed modes. There are a few hand tools included as well as three sets of software disks, please see the photos. I was not able to get the camera to work but this is probably due to my inexperience. I do not have the equipment or training to formally test this item so it is being sold as is. Due to the size/weight of this item, freight shipping arrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Due to the size of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate will be paid for by the winning bidder. Learn More
  5. C91577 Crest Ultrasonic Inline Cleaning System w/ Genesolv Solvent Drying System

    $14,999.99
    This Crest Ultrasonics 5-STA-A&B Ultrasonic Inline Cleaning System (208VAC, 13.0A, 3Ph, 50/60Hz) with GD-710-W Genesolv Solvent Drying System (208VAC, 8.0A, 3Ph) looks to be in decent cosmetic condition, showing some signs of wear. The Inline Cleaning System features three Genesis 4G-250-3 Ultrasonic Generators (120VAC) and five tanks: three are Heated Ultrasonic Tanks, measuring approximately 9-3/4"L x 6-3/4"W x 10"H; one is a Heated Tank, also measuring 9-3/4"L x 6-3/4"W x 10"H; and the fifth one is a Spray Rinse Tank, measuring approximately 9-3/4"L x 6-3/4"W x 12"H. The Genesolv Solvent Drying System features one tank, measuring approximately 9-3/4"L x 6-3/4"W x 19-3/4"H. Sold as-is. Approximate overall unpacked dimensions: 78"L x 76"W x 48"H. Due to the size of this system, a custom made pallet will be required to ship it, the cost of which will be the responsibility of the buyer. Learn More
  6. C91641 PVA Precision Valve & Automation SCS-4393 Photo Resist Spray Coater

    $7,499.99
    This PVA Precision Valve & Automation SCS-4393 Photo Resist Spray Coater looks to be in decent cosmetic condition, showing some signs of wear. The guy we got it from says it was working when pulled from service. However, we do not have any way of formally testing it here at our facility, and it is being sold as-is. It comes with a pressure vessel, as shown. Approximate overall unpacked dimensions: 45"L x 42"W x 66"H. Learn More
  7. C97021 Veeco Sloan Dektak V300-Si 12" Wafer Surface Profiler Profilometer

    $19,999.99
    This Veeco Sloan Technology Dektak V300-Si Surface Profiler for 12" Wafers looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, and the stage moves around, and the lights on the scan tower illuminate. After the system initialized and the computer fully booted up, we were able to access the Dektak software, and get it to make various scans on a wafer (please see the photos above for various screen shots). We were also able to make the scan tower move into the up and down positions, and to get the stage to move into the load and home positions. I'm not sure how to test all of this system's functions, but it appears to be doing what it is supposed to. You will likely need to have it checked out and calibrated though, if you need it to make super accurate measurements. It is available for inspection at our warehouse in Gilroy, CA. This system is being sold as-is. Learn More
  8. G96882 Asymtek Dispensing System

    $9,999.99
    This Asymtek Dispensing System, model number unknown because there is no labeling on the system, appears to be in good cosmetic condition, there are a few dings and scratches, signs of previous use. Please look at the photos. The unit powers-up, the interior lights come on as well as lights on the operators panel. The computer powers-up and appears to go through its boot-up cycle (the hard-drive light stops flashing after a little while). When the power switch for the computer monitor is turned on, a green light appears on the unit for a few seconds and then goes to a yellow “stand-by” light. The computer screen never illuminates, possibly needing parts/repair, I am not sure. There is a Pulnix machine vision camera, with an illuminator ring attached to the head unit and a video monitor with the cross hair option. Because the computer monitor does not display I cannot get any further testing accomplished with this system. I do not have the equipment or training to formally test this item so it is being sold as is. Due to the size/weight of this item, freight shipping arrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Due to the size/weight of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate will be paid for by the winning bidder. Learn More
  9. C91393 Canon PLA-501FA Parallel Light UV Wafer Mask Aligner

    $29,999.99
    This Canon PLA-501FA Parallel Light UV Wafer Mask Aligner looks to be in good cosmetic condition, showing some signs of wear. The system powers up, as shown in the photos above, and the UV lamp illuminates, and the digital displays are bright and clear, and it responds to input from the controls. It features an Olympus Trinocular Microscope Head, a pair of 10X W.F. Eyepieces, and a pair of Ushio HB-25102AP Mercury Lamp Power Supplies, as shown. I do not have any additional accessories for it. It comes as shown in the photos above. I lack the knowledge and equipment to formally test it, and it is being sold as-is. Approximate overall unpacked dimensions: 44"L x 38"W x 54"H. Learn More
  10. C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober

    $5,000.00
    This Pacific Western Systems (PWS) model P8AMS Probe II Station Semi-Automatic Wafer Prober looks to be in good cosmetic condition, showing some signs of wear. It features a Trio-Tech International Artic TC Temperature Controlled Chuck (8" Gold), a PWS Probe II Power Supply/Controller, and an EL-1302 Wafer Prober Drivers Unit with handheld controller. The chuck is mounted within a chamber, and the lid can be raised and lowered. The system powers up, and the stage moves around, and the system responds to input from the controls. When I pressed the start button, the stage started moving around automatically. I was also able to move it around manually using the manual control buttons and switches. The 2-Axis Positioning arch which moves over the probing chamber is controlled by the EL-1302 Drivers unit, and the handheld controller. It moves forward and back, and side to side. This is the extent of my testing of this probing system, and it is being sold as-is. Please see the photos above, and additional photos links below, for detail. Approximate overall unpacked dimensions: 38"L x 47"W x 58"H.

    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober11.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober12.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober13.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober14.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober15.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober16.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober17.jpg
    http://images.marketplaceadvisor.channeladvisor.com/hi/71/71481/c101148_pws_p8ams_prober18.jpg Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2