You have no items in your shopping cart.

You have no items to compare.

Search
Position
Set Descending Direction

Grid List

10 per page

9 Item(s)

  1. L94572 PlasmaQuest Reactive Ion Etching System RIE Astex MKS

    $20,000.00
    You are looking at a PlasmaQuest/Astex/MKS Resctive Ion Etching System RIE Plasma Etcher. It appears to be in good cosmetic condition showing signs of previous use. Please refer to the pictures for more detail. It has a PlasmaQuest AX2110 1000W Microwave Power Generator, 4 MKS Mass Flow Controllers 2 of 1479A52CR1BM and 2 of 1479A13CR1BM, an MKS power supply Type 260 PS-3, an MKS Vapor Source 115A, Astex Head and Plasma Source, and a VAT Gate Valve. The MKS flow controllers were running Nitrogen, Freon, Argon, chlorine, and Hydrogen gases. This also comes with two monitors and a keyboard, there is no computer included with this machine. Unfortunately I do not have any way of actually testing out this item and it is being sold untested as is. Please note that this does not come with any other parts, cables, or accessories. Learn More
  2. L91511 Lot37 Perkin Elmer Sputtering Machine Chamber Shielding Parts *NEW*

    $2,899.00
    You are looking at lot of 37 Assorted Perkin Elmer Sputtering Machine Chamber Shielding Parts. These are all new in the bag, although a few of the bags might have small cuts in them from when I used a razor to remove them from the foam packing that they were wrapped up in. This lot includes the following pieces, 6 of 10 inch dish, 6 of 10.5 inch dish rings, 2 of 10.5 inch w/notch, 2 of T Bars, 2 of Brackets, 2 of Half Plates 8 inch at biggest point, 4 of half dish 10 inch at biggest point, and 12 of 10 inch flat rings. Unfortunately I do not have any way of actually testing out any of these items and everything is being sold untested as is. This does not include any other parts, cable, or accessories other than what is stated in the listing. Learn More
  3. C87972 Innotec V-24-C VS24C High Vacuum Batch Vertical Sputtering Chamber System

    $17,499.99
    This Innotec Group Inc. model VS24C High Vacuum Batch Vertical Sputtering Chamber System looks to be in good cosmetic condition, showing some signs of wear. It appears to be fairly complete; it appears to have all of the controllers, and power supplies, and the cryo pump. However, I am not an expert on this system, so please see the photos above for what is included on the system. If you are unsure if something is included or not, please ask before bidding. I have no way of testing this system, or any of its components, and it is being sold as-is. The targets are labeled "Al Cu," "Ta" and "Hf B2." Approximate overall unpacked dimensions: 75"H x 78"W x 47"L. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. Learn More
  4. A106172 Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll

    $20,000.00
    This Northfield Automation 5319 Atmospheric Plasma Treater, Roll to Roll looks to be in good cosmetic condition with signs of wear and previous use. I really lack the knowledge and equipment to test properly so it is being sold as-is. The weight and dims are approximates. Due to the size of this unit, a custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder Learn More
  5. C115278 Anelva SPF-710H Chrome Sputtering System w/(2) RF Generator, Transformer

    $6,000.00
    This Anelva SPF-710H Chrome Sputtering System includes a PRF-503 5kW RF Generator, a 922-9531 1kW RF Generator, and a 4kVA Transformer, as shown. I'm not sure how complete the system is, so please see the photos above for detail. It is missing some of the covers, and I do not have any of the cabling needed to interconnect all of the units together. I do not have the power cords either, so I have no way of powering up or testing this system, or any of its components, and it is being sold as-is. Approximate overall unpacked dimensions: 52"L x 130"L x 71"H. Learn More
  6. C116510 Commonwealth Scientific 38JG Batch Loaded Ion Beam Etching Machine

    $40,000.00
    This Commonwealth Scientific 38JG Batch Loaded Ion Beam Etching Machine looks to be in good cosmetic condition, showing some signs of wear. I have no way of testing it, and it is being sold as-is. Among other things, it features a Pfeiffer TPH5000 Turbo Pump and TCP5000 Power Supply. Approximate overall unpacked dimensions: 124"L x 175"W x 89"H. Learn More
  7. G117973 Branson IPC L2101 Plasma Barrel Asher / Etcher

    $5,000.00
    This Branson IPC (International Plasma Corporation) L2101 Plasma Barrel Asher / Etcher appears to be in fair/good cosmetic condition, although there are a few small dings, scratches, & signs of previous use. The Quartz chamber measures about 12” inches in diameter & about 20” inches deep. Included with this unit are a Branson IPC 9160 Gas Handling Module, a Branson IPC PM9110 Controller Module, an EG&G 450-1 Radiometer / Photometer Module, a Leybold Heraeus Thermotron TM 120 Module, an MSK 252A Exhaust Valve Controller, & Branson IPC PM132 RF Generator. Please look at the photos. I do not have the equipment or training to formally power-up & test this item so it is being sold untested, as is. The unpacked dimensions of this item are approximately 65“L x 44“W x 91“H. Due to the size of this unit, a custom made pallet or crate may be required to ship it. The cost of the pallet/crate (if required) will be paid for by the winning bidder. Learn More
  8. C118362 Gasonics 9102/A Branson / IPC Plasma Corp. 9102 Plasma Asher / Etcher

    $15,000.00
    This Gasonics 9102/A Branson / IPC Plasma Corp. 9102 Plasma Asher / Etcher with ENI OEM-6B RF Generator (Model: OEM-6B-06; Input: 200-240VAC, 1Ph, 3 Wire, 20A Max; Output: 1250W) looks to be in good cosmetic condition, showing some minor signs of wear. It does not have a power cord hooked up to it. I wired one up to it, and some lights illuimated, on a board inside, and a module on the back, but I pressed all of the "Power On" buttons, but the rest of the system did not seem to respond. The ENI generator will not stay powered up. I flipped the breaker on, and the front panel lights illuminated for a second, but the breaker kept switching itself back off, and I could not get it to remained powered up. This is the extent of my testing of these items, and they are being sold as-is. Approximate overall unpacked dimensions: 41"L x 37"W x 61"H. Learn More

    Buy on eBay

  9. C141596 Cooke Sputtering Vacuum Chamber CTI On-Board 10 Cryopump 8200 Compressor

    $40,000.00
    This Cooke Vacuum Products Vacuum Chamber Sputtering System feature a CTI-Cryogenics On-Board 10 Cryopump, a CTI 8200 Compressor with hoses, an HVA 11222-1200R Gate Valve, a Varian CC Sentorr / 525/330 Vacuum Sensor set, a Key ACP-2000 System Controller, Advanced Energy ATX-600 and RFX-600 RF Generators, and an Advanced Energy 3155017-001D RF Match. These items look to be in good cosmetic condition, showing some signs of wear. However, I have no way of powering them up or formally testing them, and they are being sold as-is. Approximate overall unpacke dimensions: 69"L x 58"W x 82"H. Learn More
Position
Set Descending Direction

Grid List

10 per page

9 Item(s)